+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Porter-Cable Morten Jig (/showthread.php?tid=7331052)
Porter-Cable Morten Jig - Ray Newman - 06-17-2017
Porter-Cable MorTten Jig #5009.
From the instructions: mortise and tennon jig produces joints approximately 13/32" wide by 1 7/32" long with a tennon length of 3/4". Single or multiple configuration in material 3/4" or more in thickness.
Includes two bits.
Could not find much on-line about this jig (box is stamped Sept 23, 1993) or how well it works. Found this though from a site about "Norm's Tools" on New Yankee Workshop: http://www.normstools.com/images/normstools/pc-5009.shtml
Have no idea where this jig came from. Discovered in a box while I was cleaning out the shop and storage areas..
Did find a parts schematic, but the instruction sheet that is in the box does not list a part #105 which is on the schematic:
https://www.partswarehouse.com/Porter-Cable-5009-Morten-Jig-Mortise-and-Tenon-Joints-Jig-s/170756.htm
US$25.00,which includes US Priority Mail medium sized box shipping. Due to prior issues, will only accept a USPO Money Order and ship to the Lower 48.
First responder here it and drop me a Private Message for my mailing address to send the Money Order. Thanks, cheers and all the best, Ray N.
RE: Porter-Cable Morten Jig - Ray Newman - 06-23-2017
Please ignore/delete this thread.
Found that the bits do not fit this jig. Will relist when and if I find a source for a bit and its cost.