Wheeled base for 10-326 - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Wheeled base for 10-326 (/showthread.php?tid=7331470)

Wheeled base for 10-326 - Zhent - 07-05-2017 I'm wondering if anyone has suggestions on a mobile base for the Rikon 10-326. I've looked at the Rikon version but I'm not thrilled with the tow bar piece that would have to hang out in the shop somewhere until i wanted to move the band saw around. According to the website the base is 17 5/8 x 24. Does anyone have a recommendation for a mobile base? I think the Portamate bases start a little too large for the base, but Shop Fox and HTC both sell bases that could fit? RE: Wheeled base for 10-326 - kurt18947 - 07-05-2017 I have a 10-325. I built a wooden base lower than the factory one so the table is about the same height as other machines, around 34.5" - 35". I used 2 X 4s with 1/2" plywood panels glued into rabbets. Two wheels from Harbor Freight in the back and a lifting caster similar to this on the front.  http://www.rockler.com/caster-only-for-mobile-base  The rear wheels do not caster, they're on a metal axle that runs through the back of the cabinet. I have a door on one side so can use the wooden base for storage like the factory metal base. I had two reasons to build my own base. I wanted lower and I wanted mobile. I got both. RE: Wheeled base for 10-326 - Lynden - 07-05-2017 Harbor Freight mobile base. Use steel tubing instead of wood. http://lumberjocks.com/reviews/product/2679 https://www.harborfreight.com/300-lb-capacity-mobile-base-95288.html -- 170 reviews