+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Looking for a Jacobs chuck (/showthread.php?tid=7331499)
Looking for a Jacobs chuck - badwhiskey - 07-06-2017
I have a MT2 Jacobs chuck but when I put it in the headstock it creeps out. Is there one that accepts a threaded drawbar?
Thanks
RE: Looking for a Jacobs chuck - Joe K1 - 07-06-2017
littlemachineshop.com has several threaded arbors for drill chucks.
Example http://www.littlemachineshop.com/products/product_view.php?ProductID=1883&category=
RE: Looking for a Jacobs chuck - crokett™ - 07-06-2017
I made my own. I drilled and tapped the end of my chuck and just use a piece of 3/16" threaded rod with a wing nut and a couple large washers run through the headstock as a drawbar.
RE: Looking for a Jacobs chuck - clovishound - 07-06-2017
A soft rap with a wooden mallet keeps mine in place.
RE: Looking for a Jacobs chuck - Arlin Eastman - 07-06-2017
Use locktight on it.
RE: Looking for a Jacobs chuck - Herb G - 07-06-2017
PSI sells one.
RE: Looking for a Jacobs chuck - Arlin Eastman - 07-06-2017
Herb
You are talking about something different then what he wants
RE: Looking for a Jacobs chuck - badwhiskey - 07-07-2017
Herb's right, PSI sells a chuck which is tapped for a drawbar.
Thanks all.
RE: Looking for a Jacobs chuck - Arlin Eastman - 07-08-2017
Wow that is a new one on me. Sorry Herb
You have a link for me please.