+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Scoring blade not working on Grizzly table saw (/showthread.php?tid=7332055)
Scoring blade not working on Grizzly table saw - alsayyed - 07-27-2017
I am having little problem I have purchased Grizzly G0623X 10inch sliding table saw almost 5 months ago. It is good machine.
In the beginning it was working fine. Recently I have noticed the scoring blade is not working. the main 10 inch saw is working ok. Except the scoring blade not working at all could anybody tell me what was wrong.
I could not find enough detailes regarding the scoring blade.
RE: Scoring blade not working on Grizzly table saw - JGrout - 07-27-2017
readjust it
if it is not scoring properly then it is worn and needs normal maintenance
the manual is the place to find your information
RE: Scoring blade not working on Grizzly table saw - jteneyck - 07-27-2017
Maybe the drive belt broke?
John
RE: Scoring blade not working on Grizzly table saw - alsayyed - 07-27-2017
thank you very much i have found the problem the belt came off i have to set up in the same place is before. it is very hard to bend under the machine, becauase i have bad knees both off them , so decided to sleep under the cover because the space is tight thank you guys very much
RE: Scoring blade not working on Grizzly table saw - BobW - 07-28-2017
(07-27-2017, 08:24 PM)jteneyck Wrote: Maybe the drive belt broke?
John
(07-27-2017, 10:06 PM)alsayyed Wrote: thank you very much i have found the problem the belt came off i have to set up in the same place is before. it is very hard to bend under the machine, becauase i have bad knees both off them , so decided to sleep under the cover because the space is tight thank you guys very much
Hope you remember where you are when you wake up!
