Woodnet Forums
Amazon has a riser block for sale - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Amazon has a riser block for sale (/showthread.php?tid=7332390)



Amazon has a riser block for sale - PedroOhare - 08-09-2017

I have seen where people don't know where to get a riser block for their 14" bandsaw, and this popped up today.

https://www.amazon.com/gp/product/B0000223N9/ref=pe_2640190_232748420_pd_te_o_gc_im/147-5462021-4598466?_encoding=UTF8&pd_rd_i=B0000223N9&pd_rd_r=VNQ4FYS6H56Y6YX4FFJM&pd_rd_w=5ZwZJ&pd_rd_wg=EE3tz

I 'think' Grizzley still sells them, but here is another option.

Pedro


RE: Amazon has a riser block for sale - Steve Evans - 08-09-2017

Do the Jet pins line up with the delta, or do you need to redrill them?


RE: Amazon has a riser block for sale - Gregory of Sherwood Forest - 08-09-2017

Carter Products makes a riser kit specifically for the Delta 14". Grizzly also sells a kit, and I know of one that installed on a Delta with no issues.


RE: Amazon has a riser block for sale - Steve N - 08-10-2017

It's been a few years since I got mine, but I went through HF. You have to call in, and ask for the tech department, they have a whole bunch of stuff you'll never see in the catalog through tech. It was 83 or 84 dollars, S&H was $1.99. This was years after a lot of folks said they didn't carry them anymore, but still a few years back. You may need to file an edge, or make a very slight adjustment, but all of the Delta clones will use the same part. Just a heads up, if you order one, here, from HF, or Griz make sure you go someplace else and buy a 105" blade or 3, because no matter who you buy the riser from, that included blade is a BOW WOW DOG. Absolute proof there is no free lunch.....


RE: Amazon has a riser block for sale - PedroOhare - 08-11-2017

I got my riser kit from Grizzley. It went on fine on my Delta clone (Enco) except the guide rod was too small. I got it to work by using brass bushings but it is just enough out of alignment that I have to adjust the cool blocks every time I change the height. Does anyone know a source for just the guide bar?

Pedro


RE: Amazon has a riser block for sale - Steve N - 08-12-2017

Have you tried the "bigger hammer" tune up on it?

If it is a Delta, those bastiages have the different shaped blocks too. Maybe they made them just proprietary enough that you need a "Delta" replacement?

I just looked to see if I said the correct thing, I did.

"but all of the Delta clones will use the same part."


RE: Amazon has a riser block for sale - Cian - 08-12-2017

(08-09-2017, 04:22 PM)Steve Evans Wrote: Do the Jet pins line up with the delta, or do you need to redrill them?

If it doesn't just pull one or both pins out.  There is so much static tension when the large screw assembly is tightened down that there's no way it's gonna budge unless maybe if you tip the whole thing over and it falls catastrophically to the floor.

FWIW, I used a Delta 6" riser on my Delta bandsaw and the pins didnt perfectly align either - halves wouldn't fully compress - so I removed one pin.  By doing so you also get a range in movement which allows for a better opportunity in making the wheels coplaner - vs a one chance hit or miss.  YMMV.