+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Fire Pit (/showthread.php?tid=7332686)
Fire Pit - Bope - 08-22-2017
We are having a patio put in and would like to include a fire pit. I am having someone put all this in since it will be a bigger project than I have time for. The paver companies make fire pit kits that include a steel liner with the bricks to stack around it. My concern is there does not seem to be air vents holes along the bottom of these kits. I have camped in enough campgrounds with fire rings with no ventilation at the bottom to know how frustrating it can be to have a fire with little oxygen. When I look on line on the DYI building of fire pits they mention leaving vent holes around the bottom of the pavers. Does any one have experience with these kit fire pits? Do they work well or are they just cheap ways to give people something that just looks good? Should I push the contractor to buld it out of fire brick with ventilation or use the kit?
RE: Fire Pit - chips ahoy - 08-22-2017
Contact 2Beast,he is the landscaping genius.Sometimes hangs out in the OT forum.
Mel
RE: Fire Pit - Wipedout - 08-22-2017
I built mine without vent holes but put a raised grate in the bottom and never have a problem
RE: Fire Pit - AUswimKC - 08-22-2017
I bought a fire ring from Northern Tool. It's awesome. Weighs about 75lbs. Made by Pilot Rock? Same as the stuff at the National Parks
RE: Fire Pit - FloridaRetiree - 08-22-2017
My son has and enjoys a fire pit sitting on a wooden deck next to the canal in back of his house.
No idea where he got but it looks similar to this:
https://www.walmart.com/ip/Mainstays-Fire-Pit-28/54169733
RE: Fire Pit - David G - 08-24-2017
Consider a 48" diameter steel vessel head, 3/8" thick. Weld three legs under it and you have a raised firepit. Not easily moved however.
RE: Fire Pit - Snipe Hunter - 08-24-2017
(08-22-2017, 07:13 AM)chips ahoy Wrote: Contact 2Beast,he is the landscaping genius.Sometimes hangs out in the OT forum.
Mel
RE: Fire Pit - Wipedout - 08-24-2017
(08-22-2017, 08:45 AM)Wipedout Wrote: I built mine without vent holes but put a raised grate in the bottom and never have a problem
Here is mine
[attachment=4114]
with fire in it
[attachment=4115]
RE: Fire Pit - daddo - 08-24-2017
Ours is free standing with a huge stainless steel bowl with no vent and a small grate in the bottom. It works fine. Get a stainless bowl if you use metal or it will burn through soon enough. After 14 or so years, our bowl is still going strong.
RE: Fire Pit - Bope - 08-25-2017
(08-24-2017, 12:20 PM)Wipedout Wrote: Here is mine
with fire in it
We have a free standing "pit" but the wife would like something like this when we put in the patio. The kits use a metal ring insert instead of the fire brick you used. I don't see how that would make much difference. I like your idea of using a raised grate. I wonder about just using some sand to partially fill the pit if we want the fire raised a little.