Irwin Parallel Clamps on sale - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Irwin Parallel Clamps on sale (/showthread.php?tid=7332770) |
Irwin Parallel Clamps on sale - WarEagle Todd - 08-25-2017 Infinite Tools is having a sale on Irwin parallel clamps. I don't know how good these maybe. https://www.infinitytools.com/shop-essentials/clamping/bar-clamps-1942/irwin-parallel-jaw-clamps?utm_source=Email&utm_campaign=082417 RE: Irwin Parallel Clamps on sale - CARYinWA - 08-25-2017 (08-25-2017, 01:49 PM)WarEagle Todd Wrote: Infinite Tools is having a sale on Irwin parallel clamps. I don't know how good these maybe. I bought 6 when HD was closing them out. I hated them. The screw is so fine it takes a long time to clamp them. The action was not smooth. I sold them a couple of months ago and bought some 60" Jets at ~$36 each. RE: Irwin Parallel Clamps on sale - Steve N - 08-27-2017 (08-25-2017, 01:49 PM)WarEagle Todd Wrote: Infinite Tools is having a sale on Irwin parallel clamps. I don't know how good these maybe. Thanks for passing on the word, trying to help. Long ago I bought a LOT of Besse's, and they work just fine, so I don't need any, but I guess after seeing the last response I'd be skeeert to buy heavy if I was interested. If your lurking, and this looks like a good deal, ring out........ RE: Irwin Parallel Clamps on sale - alnandy - 08-28-2017 (08-27-2017, 05:00 PM)Steve N Wrote: Thanks for passing on the word, trying to help. Long ago I bought a LOT of Besse's, and they work just fine, so I don't need any, but I guess after seeing the last response I'd be skeeert to buy heavy if I was interested. If your lurking, and this looks like a good deal, ring out........ Irwin parallel clamps are very poor. Difficult to use, slip, hard to adjust. Pay a little more and get Pony, Bessey, or even Jet |