![]() |
Lead on an Oliver Mortiser, 3 phase in Hampton, VA - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Lead on an Oliver Mortiser, 3 phase in Hampton, VA (/showthread.php?tid=7332911) |
Lead on an Oliver Mortiser, 3 phase in Hampton, VA - EvilTwin - 08-31-2017 Picked up one of the old style Delta Tenoning jigs yesterday, you know, the one Nahm used. Anyway, I asked the guy if he had anything else to sell and as it turns out he did. Among the other things were a Rockwell 14 bandsaw with riser on a base (250, needs tires) and an Oliver Mortiser with a 3 phase motor. Besides some surface rust, the mortiser looked pretty good. He was looking for 1600 for it. Takes up too much space, too many dinero for me. I don't think its advertised anywhere, but if you PM me, I can pass you on his contact information. Here are a couple of photos of the machine. He says he has more chisels than you see in the picture. RE: Lead on an Oliver Mortiser, 3 phase in Hampton, VA - EvilTwin - 08-31-2017 Not sure what happened to the pix, lets try an attachment. RE: Lead on an Oliver Mortiser, 3 phase in Hampton, VA - iclark - 09-05-2017 Thanks for the heads-up. I share your space and cost decision, but I really appreciate your taking the effort to share the info. |