+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Saw question (/showthread.php?tid=7333203)
Pages:
1
2
RE: Saw question - Arlin Eastman - 09-13-2017
(09-13-2017, 03:47 PM)Angus Wrote: Arlin, it doesn't matter if the blade is completely vertical, but it is a perfect 90 degrees to the top of the sled.
That is what I was meaning sorry
RE: Saw question - SteveS - 09-13-2017
I used a thin kerf on my CMS one time years ago. First time I tried it on a 1.5" African blackwood square. It deflected badly so that I deemed it to be unreliable for very hard woods. Put it back in the packaging and took it back. Have only used standard kerf since then.
RE: Saw question - DFJarvie - 09-13-2017
Get a full size blade for segments. You could try sharpening it but it still may deflect. You can use a disc sander to square them up but it's a pain.
RE: Saw question - Bill Holt - 09-19-2017
I use the thin kerf for the same reasons, I also use stabilizers. Have not noticed any problems when the blade was sharp.