+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Repair information on HF compressor (/showthread.php?tid=7333627)
Repair information on HF compressor - Eurekan - 09-29-2017
I bought a Harbor Freight compressor about 8 years ago. 21 gallon @ 115psi and it has worked great. Recently it broke down and would not exceed 70psi. I tore it down and found the intake reed valve broke. I still have the owner's manual and the assembly / parts diagram is mostly worthless.
Turns out the Model 94667 compressor is the same as a Campbell Hausfeld. The rebuild kit for this model is HL026100AV. So if you need HF compressor parts then check out other manufacturers' models. Got it rebuilt and works like a champ again.
RE: Repair information on HF compressor - EvilTwin - 10-02-2017
(09-29-2017, 04:29 PM)Eurekan Wrote: I bought a Harbor Freight compressor about 8 years ago. 21 gallon @ 115psi and it has worked great. Recently it broke down and would not exceed 70psi. I tore it down and found the intake reed valve broke. I still have the owner's manual and the assembly / parts diagram is mostly worthless.
Turns out the Model 94667 compressor is the same as a Campbell Hausfeld. The rebuild kit for this model is HL026100AV. So if you need HF compressor parts then check out other manufacturers' models. Got it rebuilt and works like a champ again.
That's good to know because HF usually doesn't have much in the line of parts support for their stuff. I had one of their small blue pressure washers, worked good for a couple of years then started leaking. Took it apart and found that a small plastic part that mounted on the pressure switch had cracked. Called em up and was told it was discontinued (they had been selling that same model 6 mos earlier, I know because I got one for a friend) and that there were no parts available for it. YMMV, but probably not by much.