+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Ridgid Magswitch (Magnetic Featherboard) New (/showthread.php?tid=7333787)
RE: Ridgid Magswitch (Magnetic Featherboard) New - greenacres2 - 10-07-2017
Sending pm for 1. Thanks.
Earl
RE: Ridgid Magswitch (Magnetic Featherboard) New - Scott W - 10-07-2017
All shipping quotes have been returned.
There are three left.
Its just a little more to ship two vs. one. Just sayin'.
Thanks
RE: Ridgid Magswitch (Magnetic Featherboard) New - Scott W - 10-08-2017
Sunday bump.
RE: Ridgid Magswitch (Magnetic Featherboard) New - Scott W - 10-09-2017
I have 2 left. Maybe 3. Someone has said they want one but I can't get a response from him. Hope all is well....
RE: Ridgid Magswitch (Magnetic Featherboard) New - Christopherandco - 10-10-2017
dibs on one, funds sent
RE: Ridgid Magswitch (Magnetic Featherboard) New - PedroOhare - 10-10-2017
If you have one left I will take it.
pm sent.
Pedro
RE: Ridgid Magswitch (Magnetic Featherboard) New - Cooler - 10-10-2017
45 years ago I worked for a company that made industrial band saws for the aluminum awning industry. They had a "fence" that worked exactly the same way. It was about 30" long and without turning the turn screw to release the magnet from the table, I would defy anyone to remove the magnet by just lifting. If the surface was smooth you could manage to slide it to the edge of the table and remove it that way, but you'd have to get at least 10 inches to overhang the table before you could lift it off.
The modern take on this is to have two magnets, one that can be reversed by turning a knob. That allows the one magnet to neutralize the second one and makes release easy.
I think this is a very handy device. I think I will get a couple.
RE: Ridgid Magswitch (Magnetic Featherboard) New - Scott W - 10-10-2017
(10-10-2017, 03:20 PM)Cooler Wrote: 45 years ago I worked for a company that made industrial band saws for the aluminum awning industry. They had a "fence" that worked exactly the same way. It was about 30" long and without turning the turn screw to release the magnet from the table, I would defy anyone to remove the magnet by just lifting. If the surface was smooth you could manage to slide it to the edge of the table and remove it that way, but you'd have to get at least 10 inches to overhang the table before you could lift it off.Cooler, can you PM me if you are trying to say you want these? I can't discern between you making a comment and you saying that you want some. Thanks
The modern take on this is to have two magnets, one that can be reversed by turning a knob. That allows the one magnet to neutralize the second one and makes release easy.
I think this is a very handy device. I think I will get a couple.
RE: Ridgid Magswitch (Magnetic Featherboard) New - Scott W - 10-11-2017
I have one more left.
RE: Ridgid Magswitch (Magnetic Featherboard) New - PedroOhare - 10-12-2017
(10-11-2017, 08:51 PM)Scott W Wrote: I have one more left.
I forgot to pay you yesterday, so I hope you still have mine. I sent the money this morning. Let me know if there are any issues.
Pedro