Woodnet Forums
Filter Bag Question - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Filter Bag Question (/showthread.php?tid=7335714)



Filter Bag Question - JHyde23 - 12-20-2017

Some mice ate my Central Machine #97869 dust collector filter bag while it was stored in my shed and I need to buy a replacement.  I threw out the old one and the manual doesn't give me any specific information about size etc.

What type would you recommend I replace it with?

Also, I am going to set it up in my garage for use with various power tools.  Things will move around a bit...any suggestions on how to flex pipe things together?  I've got some 10' pieces of flexible corrugated drainage pipe that i was thinking of using.  Obviously not as good as smooth wall PVC, but I bought it to relocate some insulation and it worked well.

I am a hobby woodworker...a project or two a month, so I don't need anything extravagant.


RE: Filter Bag Question - Cooler - 12-21-2017

(12-20-2017, 07:57 PM)JHyde23 Wrote: Some mice ate my Central Machine #97869 dust collector filter bag while it was stored in my shed and I need to buy a replacement.  I threw out the old one and the manual doesn't give me any specific information about size etc.

What type would you recommend I replace it with?

Also, I am going to set it up in my garage for use with various power tools.  Things will move around a bit...any suggestions on how to flex pipe things together?  I've got some 10' pieces of flexible corrugated drainage pipe that i was thinking of using.  Obviously not as good as smooth wall PVC, but I bought it to relocate some insulation and it worked well.

I am a hobby woodworker...a project or two a month, so I don't need anything extravagant.
It is in Harbor Frieight's online owners' manual, but here it is:

top, 19½" x 30" long
Bottom, 19½" x 30-7/8"
5 micron


RE: Filter Bag Question - lkomroff - 12-21-2017

You could check out this company https://americanfabricfilter.com/filter-bags/     I have never used them but heard good things.  You could also convert that dust collector to use a cartridge filter.  There is a lot of info on the net about that conversion.


Larry


RE: Filter Bag Question - Carl10 - 12-21-2017

I cleaned an AFF bag once and was amazed how easy it was. There is a coating on the inside and you can just wipe the dust off. I can believe all the good things said about their filters.

Hope that helps. Let us know what you do.

Carl


RE: Filter Bag Question - daddo - 12-22-2017

On the other side- it's just cloth. For the time being, just sew up an old bed sheet to get you by until you find what you want.

No pink unicorns.


RE: Filter Bag Question - tomsteve - 12-22-2017

ive had this top on my HF for a few years now
https://www.amazon.com/POWERTEC-70001-Collector-20-Inch-31-Inch/dp/B005VSAP74

no complaints here.


these for the bottom
https://www.amazon.com/POWERTEC-70002-Plastic-Collection-20-Inch/dp/B005VSBBKO/ref=sr_1_4?s=hi&ie=UTF8&qid=1513964559&sr=1-4&keywords=dust+collector+plastic+bag

theyre a little loose, but i run some clear packing tape along the joint after the strap is in place.

as far as the flex pipe, i think you can find something a little more user friendly then the drainage pipe.