Woodnet Forums
Daily Bench Shot - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Daily Bench Shot (/showthread.php?tid=7336585)



RE: Daily Bench Shot - Stwood_ - 02-19-2019

(02-19-2019, 08:17 PM)Redman Wrote: Small dollies huh. I'll need to look for those.

Worthless helper laying down on the job there between the hammer and pencil? And you gotta quit leaving them gloves out in plain sight. You'll never find them on that pick up bed. VOE, BTDT 
Winkgrin

New brown helper, sitting on the pad.
Winkgrin 

(02-19-2019, 08:34 PM)Philip1231 Wrote: Nothing but dovetails today:

Lotsa sawing going on there...


RE: Daily Bench Shot - Redman - 02-20-2019

(02-19-2019, 11:43 PM)Stwood_ Wrote: New brown helper, sitting on the pad.
Winkgrin 

I saw that. Thought it might be some kind of puzzle or key part. Must be pink eraser by the hammer.


RE: Daily Bench Shot - Stwood_ - 02-20-2019

Making some shelf pullouts. Was band sawing the front hand holds and....K-Pow!!!!!!!!
Thought I broke a blade. Nope.......
Put the blade back on, spun the wheel to align the blade before I tension-ed it and ...pow!!!
It d-tensioned again. I've got something going on with the upper wheel tensioner. Hafta to pull the wheel to even see in there.
Mad

[attachment=16769]


RE: Daily Bench Shot - Redman - 02-20-2019

(02-20-2019, 07:16 PM)Stwood_ Wrote: Making some shelf pullouts. Was band sawing the front hand holds and....K-Pow!!!!!!!!
Thought I broke a blade. Nope.......
Put the blade back on, spun the wheel to align the blade before I tension-ed it and ...pow!!!
It d-tensioned again. I've got something going on with the upper wheel tensioner. Hafta to pull the wheel to even see in there.
Mad

Did you blow a bearing?

Looks like new brown helper is laying down on the job, old worthless helper getting it done.


RE: Daily Bench Shot - Gary G™ - 02-20-2019

This is what happened to my bandsaw too.
Haven’t had time to break it down and figure it out.


RE: Daily Bench Shot - Stwood_ - 02-21-2019

(02-20-2019, 07:56 PM)Gary G™ Wrote: This is what happened to my bandsaw too.
Haven’t had time to break it down and figure it out.

Yea. What brand?

MM16 here






Gluing up F and B's of pullouts. Then pin with dowels.

[attachment=16788]


RE: Daily Bench Shot - Gary G™ - 02-21-2019

Mine’s an older Laguna 16LT made in Italy green machine.


RE: Daily Bench Shot - Stwood_ - 02-21-2019

(02-21-2019, 05:21 PM)Gary G™ Wrote: Mine’s an older Laguna 16LT made in Italy green machine.

Probably the same co made both.
My lower wheel seems to have shifted inward. 1/4 blade is riding on the outside edge.
Blade is running middle of the wheel on upper. Nothing seems loose.
The brake pad on the inside part of the lower wheel is somewhat out of the wheel. Yea it has a brake that I don't use


RE: Daily Bench Shot - EdL - 02-24-2019

Putting some dominoes in a cabinet for a built in dishwasher.  
Rolleyes

Yea, I know, built in dishwashers don't need cabinets, except when they are replacing a stand-alone unit thats on the opposite side of the kitchen from the sink.  
Rolleyes

Ed


RE: Daily Bench Shot - Stwood_ - 02-25-2019

Finishing up the pantry pullouts.

[attachment=16884]