Woodnet Forums
Daily Bench Shot - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Daily Bench Shot (/showthread.php?tid=7336585)



RE: Daily Bench Shot - Redman - 02-11-2018

(02-11-2018, 09:46 AM)GlenS Wrote: I'm going to rip thin strips of Poplar & Cherry. Glue & bend them around the jig/form to form the apron for the 1/2 round table. The notches are for the clamps. Wish me luck!! LOL

I'll be waxing the TS soon myself. Especially with Spring coming here in Ohio & an unheated garage.

Kewl and good luck with the bending and glueing.


RE: Daily Bench Shot - Stwood_ - 02-11-2018

(02-11-2018, 09:19 AM)GlenS Wrote: Here's what is on my bench. It's a pile of yet to be determined lumber & a jig I made up. I think the Cherry on the bottom will be a small 1/2rd table for beside the recliner.




Cool


RE: Daily Bench Shot - Stwood_ - 02-11-2018

[attachment=8149]

Had to dig out my last NOS porter cable BN200A nail gun, as another one quit today. My guns are all high mileage, and I need to get 4-5 kits and rebuild several of them.

The BN200A and BN125 is no longer made, sadly.  Some of their best guns before all the tool co. buyouts.


RE: Daily Bench Shot - Redman - 02-11-2018

(02-11-2018, 06:32 PM)Stwood_ Wrote: Had to dig out my last NOS porter cable BN200A nail gun, as another one quit today. My guns are all high mileage, and I need to get 4-5 kits and rebuild several of them.

The BN200A and BN125 is no longer made, sadly.  Some of their best guns before all the tool co. buyouts.

Cloth boxes?


RE: Daily Bench Shot - Stwood_ - 02-11-2018

Cloth covered, yes.


RE: Daily Bench Shot - rick4212 - 02-11-2018

10 dinning chairs


RE: Daily Bench Shot - GlenS - 02-12-2018

Thanks Redman!! It'll be an adventure I'm sure!!

Rick-- Those are gonna be some very nice chairs!! Can't wait to see the finished ensemble!!


RE: Daily Bench Shot - Redman - 02-12-2018

(02-11-2018, 11:43 PM)rick4212 Wrote: 10 dinning chairs

Ok I give up is that a table saw, shaper, router table or something else under the dust collector?


RE: Daily Bench Shot - rick4212 - 02-12-2018

Reman wrote:
Ok I give up is that a table saw, shaper, router table or something else under the dust collector?

Table saw. My work bench and table saw (really everything) is the same height which makes everything a lot easier in a small shop like mine.


RE: Daily Bench Shot - Redman - 02-12-2018

(02-12-2018, 11:17 AM)rick4212 Wrote: Reman wrote:
Ok I give up is that a table saw, shaper, router table or something else under the dust collector?

Table saw. My work bench and table saw (really everything) is the same height which makes everything a lot easier in a small shop like mine.

Someday I'll build a ramp for my saw, it's 6" higher than everything else. They built the floor too close to my arse. Laugh