+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Daily Bench Shot (/showthread.php?tid=7336585)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
RE: Daily Bench Shot - thewalnutguy - 10-07-2021
(01-19-2018, 07:10 PM)Stwood_ Wrote: Post away. Give me a picture of what's on your workbench today.
Daily, weekly, whatever. Come on, what is laying there you are working on, or need to put up that's in the way.
Here's mine today. Not much going on, just a table to repair the leg on.
Table is nearing completion. Just a set of four stretches to connect the upper corners of the top horizontal piece from one leg to the next. Material is oak, aniline "Light Pear" dye, walnut colored grain filler, poly finish.
The top is already finished, afraid I can't tell you the variety as it was a South American hardwood included as a bonus when I ordered a Makita planer about 30 years ago. The little box next to the table top is a sewing box I repaired/refinished for the same friend who'll be getting the table as a present this weekend.
RE: Daily Bench Shot - Stwood_ - 10-07-2021
(10-06-2021, 07:40 AM)Belle City Woodworking Wrote: Greg,
You been hitting the Gym?
That be the Illinois Muscle Man
RE: Daily Bench Shot - Stwood_ - 10-15-2021
(10-07-2021, 05:18 PM)thewalnutguy Wrote: Table is nearing completion. Just a set of four stretches to connect the upper corners of the top horizontal piece from one leg to the next. Material is oak, aniline "Light Pear" dye, walnut colored grain filler, poly finish.
The top is already finished, afraid I can't tell you the variety as it was a South American hardwood included as a bonus when I ordered a Makita planer about 30 years ago. The little box next to the table top is a sewing box I repaired/refinished for the same friend who'll be getting the table as a present this weekend.
Lookin good.
Clearing the bench off, slowly.
Clearing the bench......
RE: Daily Bench Shot - Stwood_ - 10-26-2021
[attachment=38372]
RE: Daily Bench Shot - Bob10 - 10-26-2021
That bench should be covered in bee boxes and the like. Mine will be tomorrow. I need to set up the Dado stack
to cut it all. Using 1x12 running rabbets across the top for frames and up the sides to accommodate the side boards and the cut off for quilt boxes.
I think next Spring I will be housing hives off site because no space for more here.
RE: Daily Bench Shot - Stwood_ - 10-26-2021
(10-26-2021, 08:58 PM)Bob10 Wrote: That bench should be covered in bee boxes and the like. Mine will be tomorrow. I need to set up the Dado stack
to cut it all. Using 1x12 running rabbets across the top for frames and up the sides to accommodate the side boards and the cut off for quilt boxes.
I think next Spring I will be housing hives off site because no space for more here.
Cleaned up boxes, full of frames are in back, catching sunlight from the window, trying to ward off the mite attacks.
Other boxes and frames are in the garage, in one of the sheds......wife has them strung everywhere.
Course I don't want them sticky, mouse/ant attracting things in here.
RE: Daily Bench Shot - Bob10 - 10-28-2021
(10-26-2021, 11:07 PM)Stwood_ Wrote: Cleaned up boxes, full of frames are in back, catching sunlight from the window, trying to ward off the mite attacks.
Other boxes and frames are in the garage, in one of the sheds......wife has them strung everywhere.
Course I don't want them sticky, mouse/ant attracting things in here.
My boxes all got stuck back on the bees after extraction they dried them out in a week. Longtime beekeeper contacted me tonight he has about 100 drawn out frames he no longer wants. I hope to pick them up tomorrow. I have boxes to hold them and a stack of wood to make another 17 boxes. I am going to place hives on other people's property seems lots of people want them and I have maxed out what I can handle at my place.
RE: Daily Bench Shot - Rob Young - 10-31-2021
Making some small shooting boards for use in a KCWG class. Sized for use with a Stanley or LN 60-1/2. Cutting the top plate and fence with my Shaper Origin. On the top plate I've got a 1/16" deep dado in which I press-fit the fence. Seems to work pretty well. Then all I have to do it cut out the base plate and cleat. The base plate also gets a dust groove.
First one is assembled and tests out great. In clamps are 5 other sets of parts ready to go. Eventually I'll have 14 of these made up but before I can finish that I need to find out how many people in the KCWG class are left handed.
[attachment=38490]
[attachment=38491]
[attachment=38492]
RE: Daily Bench Shot - Eumelia Anatjari - 11-01-2021
(10-26-2021, 11:07 PM)Stwood_ Wrote: Cleaned up boxes, full of frames are in back, catching sunlight from the window, trying to ward off the mite attacks.
Other boxes and frames are in the garage, in one of the sheds......wife has them strung everywhere.
Course I don't want them sticky, mouse/ant attracting things in here.
Hah, because of that, I stopped storing my crafts in the garage in the middle. This is my problem. And the wife swears that the parts are at home.
RE: Daily Bench Shot - Aram - 11-06-2021
Might be something, someday.
![[Image: i-4FjtV2z-M.jpg]](https://photos.smugmug.com/photos/i-4FjtV2z/0/dd46d109/M/i-4FjtV2z-M.jpg)