Woodnet Forums
Daily Bench Shot - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Daily Bench Shot (/showthread.php?tid=7336585)



RE: Daily Bench Shot - ®smpr_fi_mac® - 12-03-2018

Yup, for template routing.

I cut the first one close to the line then sanded to it with an oscillating spindle sander. Then traced onto the second one, cut close to the line, then taped the two together. Flush cut bit in the router made quick work of a near-perfect, FASTER, shaping.

I need to make six more now that this one got (enthusiastically!) approved by the dance teacher/director.


RE: Daily Bench Shot - Stwood_ - 12-03-2018

(12-03-2018, 09:02 PM)®smpr_fi_mac® Wrote: I need to make six more now that this one got (enthusiastically!) approved by the dance teacher/director.

Cool


RE: Daily Bench Shot - Stwood_ - 12-04-2018

[attachment=14819]


RE: Daily Bench Shot - K. L. McReynolds - 12-05-2018

Christmas presents. Trays for eating/whatever. One of the drunken design and one checkerboard will go to England. Will have maple handles.



[attachment=14833]
[attachment=14832]


RE: Daily Bench Shot - Redman - 12-06-2018

Very nice whatever boards.

I'm also glad to see I'm not the only one that can't find the floor in my work area.  Laugh


RE: Daily Bench Shot - Redman - 12-06-2018

Setting up drill press to c'bore, drill and c'sink some shelving. The piece drilled is a set up piece to check the set up before drilling the good wood. Naturally some changes had to be made.











RE: Daily Bench Shot - Stwood_ - 12-06-2018

(12-06-2018, 11:03 AM)Redman Wrote: Setting up drill press to c'bore, drill and c'sink some shelving. The piece drilled is a set up piece to check the set up before drilling the good wood. Naturally some changes had to be made.

Is that a C-man fence on your drill press? I kinda like that one.





Son was kind enough to bring 2 more guns for repair, from another framer friend. Rolleyes Laugh Laugh Laugh

[attachment=14854]


RE: Daily Bench Shot - Stwood_ - 12-06-2018

(12-05-2018, 05:57 PM)K. L McReynolds Wrote: Christmas presents. Trays for eating/whatever. One of the drunken design and one checkerboard will go to England. Will have maple handles.

That one on the left makes yer head spin..... Laugh


RE: Daily Bench Shot - K. L. McReynolds - 12-06-2018

(12-06-2018, 05:06 PM)Stwood_ Wrote: That one on the left makes yer head spin..... Laugh


They are fun to make, and popular. Yes
[attachment=14855]


RE: Daily Bench Shot - Redman - 12-06-2018

(12-06-2018, 05:04 PM)Stwood_ Wrote: Is that a C-man fence on your drill press? I kinda like that one.

Yes, came with the C-man mortising chisel set I mentioned in another thread. Fence itself is OK, setting it up can be a PITA because of the T-slots on the table and the provided T-nuts and bolts. Problem I had with the set up was the chuck hit the fence before desired depth of hole was reached, therefore the chunk of wood under the work piece, which caused an adjustment to the fence.