Lathe Lighting - Printable Version

Lathe Lighting - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Lathe Lighting (/showthread.php?tid=7339247)

Pages: 1 2 3

RE: Lathe Lighting - Arlin Eastman - 05-04-2018

(05-04-2018, 12:23 AM)Big Dave Wrote: Here's what I did on my midi....

Dave

Goodness Dave you sure have nice setup buddy. Something I can only dream of.

Michael

I have one almost like that but how are the bulbs changed? That is why I have another plus two are really good also.

RE: Lathe Lighting - iclark - 05-05-2018

I use a nice LED worklight on a tripod that I got at ACE.

I used to use several of the clip-on floods, but the LED is a huge improvement.

I also have some magnetic-base gooseneck lights that can be on the headstock or the BS as needed.

RE: Lathe Lighting - EricU - 05-09-2018

I got one of these for task lighting:
https://www.amazon.com/gp/product/B01KZLM3QC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
adjustable color temperature and brightness

I have some stands to put it on, haven't figured out which one I'll use yet

RE: Lathe Lighting - Dusty Workshop - 05-12-2018

Amazon had these for $5 off a few weeks ago

https://www.amazon.com/dp/B012C240BS/ref=cm_sw_r_other_apa_i_jbW9Ab7Z7Q9X3

RE: Lathe Lighting - mpax356 - 06-30-2018

(04-29-2018, 08:57 AM)jcredding Wrote: Trying to get better light at the lathe and didn’t see a discussion about it when searching. Right now, have the shop overheads throughout (8 4’ fixtures in 1000 sq ft shop) and am going to put one more over the lathe. Was also thinking it would be nice to have something that I can use closer to the work piece since the vision isn’t what it used to be (getting old sucks . . . but beats the alternative). Curious what people use to light the workpiece.

Thanks, John

Here is a video I did on lathe lighting. https://www.youtube.com/edit?o=U&video_id=VsAH9ZWLN_c

RE: Lathe Lighting - sniper - 06-30-2018

(06-30-2018, 07:22 PM)mpax356 Wrote: Here is a video I did on lathe lighting. https://www.youtube.com/edit?o=U&video_id=VsAH9ZWLN_c

linky no worky, get this message "You must create a channel to upload videos. Create a channel "

RE: Lathe Lighting - Cian - 07-01-2018

(04-30-2018, 10:59 AM)hairy Wrote: I have three 4' fluorescents overhead, and a tripod light to see inside. $3 at a yard sale.

Sweet lathe!
Cool

RE: Lathe Lighting - Arlin Eastman - 07-02-2018

Here is the light I just bought a week ago for $17. I put 5 of my 1" rare earth magnets on the bottom and it sticks VERY well on the side of my cabinet.

https://www.menards.com/main/lighting-ceiling-fans/indoor-lighting/lamps/patriot-lighting-reg-awar-25-5-h-satin-nickel-1-light-adjustable-desk-lamp/tb1023sn/p-1444438464395-c-7497.htm?tid=-1833418260642611380&ipos=41

I put it sideways on the side and it will extend very well for lots of light with a 100w led.