Grizzly Jointer with sprial head - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Grizzly Jointer with sprial head (/showthread.php?tid=7340479) |
Grizzly Jointer with sprial head - Cecil - 06-24-2018 It is my understanding that there are two different spiral heads. One has carbide knives arranged in a spiral, but each cutter is set at a right angle. The other is a Byrd Shelix, in which the cutters are set at an angle, as well as arranged in a spiral. Am I correct on this. Does anyone know which head Grizzly uses? Specifically I am considering G0656X. RE: Grizzly Jointer with sprial head - CARYinWA - 06-24-2018 The Byrd cutters are set at an angle. I have a Grizzly head and a Byrd head and I don't see a difference in cut quality. RE: Grizzly Jointer with sprial head - lift mechanic - 06-24-2018 My Delta planer has a Byrd head and the Grizzly jointer has the spiral head. I do not see any difference in the quality of cut. I haven't used any highly figured woods except QSWO and again I saw no difference in the finish cut. RE: Grizzly Jointer with sprial head - Tapper - 06-25-2018 (06-24-2018, 07:23 AM)CARYinWA Wrote: The Byrd cutters are set at an angle. I have a Grizzly head and a Byrd head and I don't see a difference in cut quality. I also have two Grizzly-made machines with different heads, a 15" Shopfox planer with the Griz head and an 8" Shopfox jointer with a Byrd head. Cannot tell the difference. Doug RE: Grizzly Jointer with sprial head - Bit_Fiddler - 06-30-2018 (06-24-2018, 07:15 AM)Cecil Wrote: It is my understanding that there are two different spiral heads. One has carbide knives arranged in a spiral, but each cutter is set at a right angle. The other is a Byrd Shelix, in which the cutters are set at an angle, as well as arranged in a spiral. Am I correct on this. I've been looking at their !2" jointers - one has a head with 60 carbide inserts, the other has a head with 96 carbide inserts. There is a different pattern to how the inserts are placed, I have no idea what difference it makes in terms of cut quality. RE: Grizzly Jointer with sprial head - Cian - 07-01-2018 I have Grizzly’s G1021x2 which does have a spiral carbide insert head and the cutters are set at an angle much like the Shelix (but isn't an official Shelix head) - one of the reasons I selected this model. IIRC, the cutterhead is made in Taiwan but the inserts themselves are sourced from Germany. Interestingly, I thought this planer was discontinued and was dropped from their lineup, but I now see it in their online catalog, albeit OOS. I purchased mine years ago though (anybody remember that crazy Windows LIVE 25% eBay discount?), so am unsure who their cutting head supplier is now. FWIW, I have a Shelix in my 8” jointer and the surfaces produced by either are indistinguishable. I took some pics of the Grizzly cutterhead when it first arrived: |