Woodnet Forums
The Birth of a Grizzly Table Saw - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: The Birth of a Grizzly Table Saw (/showthread.php?tid=7341528)

Pages: 1 2 3 4


RE: The Birth of a Grizzly Table Saw - Admiral - 08-16-2018

(08-15-2018, 08:49 PM)Lucky Irish Wrote: It does have the riving knife.
I think it has more to do with the way the top is machined for the factory insert. There isn't much depth around the edge of the insert and they use a magnet to hold it down at the front.

Easy enough to make your own; inlay and glue in a rare earth magnet to hold it firmly.


RE: The Birth of a Grizzly Table Saw - Cian - 08-17-2018

Gotta lov that new saw smell!  
Cool


RE: The Birth of a Grizzly Table Saw - Tapper - 08-19-2018

(08-10-2018, 11:04 AM)5thumbs Wrote: I applied the Camelia oil on the table top and sides. I've used it successfully for about 5 years on my planes and chisels - no rust even in an unheated shop. I also used it on my jointer for about 3 years with great success.

I used paste wax in the past - had not problems with that but I've heard it doesn't always work. Tried the Camelia oil a few years ago and we pretty happy with the results. I leave it on for a day or so then wipe with a clean cloth. Doesn't seem to transfer to wood.

Fully assembled yet? Test drive?

Doug


RE: The Birth of a Grizzly Table Saw - 5thumbs - 08-20-2018

Had some delay due to the localized flooding and the resulting cleanup. Didn't affect the shop but the vegetable garden needed help and I got drafted by the wife. (She's the one who sprang for the extra $$ to buy the saw so I couldn't really refuse.)

After that, I decided to re-organize the shop - that's almost done - hope to finish today. then comes the fun part - pics and making sawdust!


RE: The Birth of a Grizzly Table Saw - daddo - 08-20-2018

I've always called the riffing knife a splitter. Hard to break old habits, especially when "knife" and "riffing" never seemed to make sense of the tool.


RE: The Birth of a Grizzly Table Saw - med-one - 08-20-2018

(08-20-2018, 08:38 AM)daddo Wrote: I've always called the riffing knife a splitter. Hard to break old habits, especially when "knife" and "riffing" never seemed to make sense of the tool.

Me too............


RE: The Birth of a Grizzly Table Saw - Bill Wilson - 08-20-2018

(08-20-2018, 08:38 AM)daddo Wrote: I've always called the riffing knife a splitter. Hard to break old habits, especially when "knife" and "riffing" never seemed to make sense of the tool.

I've never heard or seen the term "riffing" knife.  I've always seen it spelled "riving".  I always presumed the name came from the similarity to "riving" the wood, sort of like with a froe. 

Definition of rive

1 a : to wrench open or tear apart or to pieces rend

b : to split with force or violence

2 a : to divide into pieces
  • nations riven by civil war

b : fracture


RE: The Birth of a Grizzly Table Saw - TDKPE - 08-20-2018

(08-20-2018, 11:44 AM)Bill Wilson Wrote: I've never heard or seen the term "riffing" knife. 

Bobby Darin does a bit of riffing on Mac the Knife.  
Raised




RE: The Birth of a Grizzly Table Saw - daddo - 08-20-2018

Good musac.
........


RE: The Birth of a Grizzly Table Saw - Bill Wilson - 08-21-2018

(08-20-2018, 02:36 PM)TDKPE Wrote: Bobby Darin does a bit of riffing on Mac the Knife.  
Raised


Well played, sir. 
Laugh