+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: It followed me home.. (/showthread.php?tid=7342013)
Pages:
1
2
It followed me home.. - bandit571 - 08-27-2018
Can I keep it? Huh? Can I?
[attachment=12551]
Won at a get together Saturday, as a Door Prize. I was there to give a class on the Stanley 45...
[attachment=12552]
And even got "gifted with a few other toys"..
[attachment=12553]
And...
[attachment=12554]
Sooo
...a new in the box, WoodRiver #62 came home with me.....was a decent weekend?
RE: It followed me home.. - bandit571 - 08-27-2018
Still working on an ID for the eggbeaters....the two breast drills? One is a Jordan France....the other is a Goodell-Pratt, with a label on the grear wheel. The chain drill? Also a Goodell-Pratt,,,,single patent date.
[attachment=12555]
Was also gifted with this box....red package it an 80" bandsaw blade, 15tpi, from Sears. That little chuck? You add that to about any brace drill, and then use small twist drills, like for pilot holes.
[attachment=12556]
And a stack of hardwood flooring cutoffs....will see what I can cobble up from them. That wooden jack plane? Needs a tapered single iron. Also has a split right down the center line..
Swag bag from Laguna, EWT, and Woodcraft....not too bad of a day....
RE: It followed me home.. - Bill_Houghton - 08-27-2018
Quite the party you went to!
RE: It followed me home.. - Carl Grover - 08-27-2018
You suck
carl
RE: It followed me home.. - bandit571 - 08-28-2018
Ok...ID for a couple of the drills...so far..
[attachment=12576]
Goodell-Pratt No. 329 double pinnon eggbeater
[attachment=12577]
The Goodell-Pratt Breast drill...
[attachment=12578]
With label on the gear wheel....
[attachment=12579]
Is stamped on the crank handle as a No. 0477....
Cleaned this thing up...
[attachment=12580]
Is stamped on the chuck as a Goodell-Pratt. Along with a single patent date.
Slowly getting things cleaned up, and an ID for each....
RE: It followed me home.. - bandit571 - 08-28-2018
Mystery drill. Has stamped onto the Crank handle...
[attachment=12581]
Either "Jordan" or Jordin? and FRANCE.....looks like OEM Paint was a dark blue?
[attachment=12582]
Two speed, the gears sit in an enclosed area....used to be a ball bearing thrust washer.....most of the balls had fallen out....
[attachment=12583]
The drill behind it is a Millers Falls No. 120, so this "French Drill" is a biggie. Not much else to go on...
RE: It followed me home.. - Enigmatic - 08-28-2018
That's a nice haul. Great looking old tools in there.
RE: It followed me home.. - Skip J. - 08-28-2018
(08-28-2018, 01:34 PM)Enigmatic Wrote: That's a nice haul. Great looking old tools in there.
Welcome to the forum!!!
RE: It followed me home.. - Enigmatic - 08-28-2018
(08-28-2018, 01:38 PM)Skip J. Wrote: Welcome to the forum!!!
Thanks.
RE: It followed me home.. - BloomingtonMike - 08-28-2018
That WR looks sweet! Congrats.