Woodnet Forums
The next turning I just finished 3 days before the wedding - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: The next turning I just finished 3 days before the wedding (/showthread.php?tid=7342029)



The next turning I just finished 3 days before the wedding - Arlin Eastman - 08-27-2018

This bowl had taken me a month of on and off turning.  Not because it was hard to did it between spells of feeling OK to do it.

The wood is Catalpa and Turquoise.  I got the Turquoise from EBay on 15.5" strings for $1.77 each and got 5 of them.

[attachment=12571]


[attachment=12572]


As most of the time.  Three coats of Tru Oil and Beall buffing system.  On getting the stone crushed I used 12" of black pipe and end caps on both ends.  I sanded off the one end flat so it would crush the stones better and they not fly out.  I then used a 2" black pipe end and turned some 2" x 8" red oak and then glued a 8"x12" red oak board to the bottom.  In the center made of the red oak I turned a hole to hold the cap and then epoxied it all in.  Then I used a hammer on top of the 1" pipe to crush it.

I will add a picture of it tomorrow.


RE: The next turning I just finished 3 days before the wedding - Dusty Workshop - 08-28-2018

I like it Arlin..
So will the recipients


RE: The next turning I just finished 3 days before the wedding - EightFingers - 08-28-2018

How big is it? The turquoise looks nice with that wood.


RE: The next turning I just finished 3 days before the wedding - Arlin Eastman - 08-28-2018

10" wide at the top and 4" at the bottom and about 4" tall.

I should have said 4 days and not 3 since the wedding is this Friday and we leave tomorrow for Superior, WS.

Anyone live around Duluth, MN or Superior, WS?


RE: The next turning I just finished 3 days before the wedding - danceswithticks - 08-31-2018

(08-28-2018, 01:58 PM)Arlin Eastman Wrote: 10" wide at the top and 4" at the bottom and about 4" tall.

I should have said 4 days and not 3 since the wedding is this Friday and we leave tomorrow for Superior, WS.

Anyone live around Duluth, MN or Superior, WS?

Pretty  bowl, that will make a real  nice gift. The contrast with the turquoise is cool.  I don't live near Superior / Duluth but have gone through it quite a few times. If you have the time, Highway 61 north toward Canada is one of the real scenic gems in the area. Beautiful vistas of rocky Lake Superior abound. Makes for a nice drive , especially if your a passenger and not the driver.


RE: The next turning I just finished 3 days before the wedding - Arlin Eastman - 08-31-2018

The wedding was at 3pm and went until 7pm and o what a day.  Really to long to be out for me.   We leave tomorrow at 12pm or so and drive to Des Moines to spend the night.

I hope she likes it to.


RE: The next turning I just finished 3 days before the wedding - Rodneywt1180b - 08-31-2018

Great looking bowl Arlin.  I really like Catalpa to work with.


RE: The next turning I just finished 3 days before the wedding - Big Dave - 09-01-2018

Looks good, Arlin!
Yes


Cool
Cool