+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Bosch 18 v battery problem (/showthread.php?tid=7342214)
Bosch 18 v battery problem - Wild Turkey - 09-05-2018
My 18v impact driver got left outside for a few days despite my hunting for it several times.
Found it after I got a new one
Battery was dead, but put it in charger and it now indicates full charge and will light up flashlight from new kit but won't turn drill or driver.
Are there some bad contacts that need cleaning or is it somehow down on amperage but still lights all three charge indicator lights?
I'm trying to cycle it a couple of times to see if it wakes back up.
RE: Bosch 18 v battery problem - EvilTwin - 09-06-2018
Lithium or nicads? Assuming you have a second battery and have verified that the tools work ok on that one? You could try and open up the battery in question and see if there is any water inside. Difference between a light and a motor driven tool is amperage required. Sounds like that battery has some issue in dumping the amps that the drill needs.
RE: Bosch 18 v battery problem - Wild Turkey - 09-06-2018
(09-06-2018, 07:18 AM)EvilTwin Wrote: Lithium or nicads?
Lithium and I've got a couple other batteries that I'm using while checking this one.
Good idea about opening it up. I'll take a look tomorrow.