+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Grizzly Bandsaw 3/4" wide blade (/showthread.php?tid=7342259)
Grizzly Bandsaw 3/4" wide blade - Dennis Puskar - 09-06-2018
Has any of you that has a Grizzly G0555LX used a 3/4 wide blade ?
How did the blade run, tracking ?
RE: Grizzly Bandsaw 3/4" wide blade - med-one - 09-07-2018
Isn't that a bit wide for a 14" saw?
RE: Grizzly Bandsaw 3/4" wide blade - Gary™ - 09-07-2018
I put the 3/4 Timberwolf on my G0555. It cut ok but I had to really crank the spring to get it tensioned.
RE: Grizzly Bandsaw 3/4" wide blade - Bob K - 09-07-2018
I tried one but mine worked best with a half inch blade.
RE: Grizzly Bandsaw 3/4" wide blade - Stwood_ - 09-07-2018
Thats a lota blade for a 14
RE: Grizzly Bandsaw 3/4" wide blade - kurt18947 - 09-07-2018
(09-07-2018, 04:18 PM)med-one Wrote: Isn't that a bit wide for a 14" saw?
For a Grizzly cast iron saw? Sure seems like it. For something like a 14" Laguna LT14 SUV? Maybe not.
RE: Grizzly Bandsaw 3/4" wide blade - Dennis Puskar - 09-07-2018
(09-07-2018, 04:18 PM)med-one Wrote: Isn't that a bit wide for a 14" saw?
Yes I thought it is a bit to wide for a 14" bandsaw but the manual says it will handle a 3/4" wide blade, guess you can't believe every you read.
Thanks guys for your input.
RE: Grizzly Bandsaw 3/4" wide blade - EdL - 09-07-2018
Never used anything wider than 1/2 on my 555 when I had it. Always used Timberwolf's, worked good and easy to tension.
Ed
RE: Grizzly Bandsaw 3/4" wide blade - Dennis Puskar - 09-07-2018
(09-07-2018, 10:05 PM)EdL Wrote: Never used anything wider than 1/2 on my 555 when I had it. Always used Timberwolf's, worked good and easy to tension.
Ed
I have to agree with you Thanks.