What to use over boiled linseed oil - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: What to use over boiled linseed oil (/showthread.php?tid=7342499) Pages:
1
2
|
RE: What to use over boiled linseed oil - AHill - 09-27-2018 (09-23-2018, 10:32 AM)Tony Z Wrote: How about something like Waterlox? Waterlox is a great finish, but not available everywhere in the US due to VOC restrictions. Check to make sure before you try to buy. I used to live in LA County in California, and you just couldn't buy it there. I could drive 90 miles and get it, though. Couldn't get lacquer either! I don't think Waterlox will darken the cherry any more than BLO would. In time, the cherry will darken as it's exposed to light. I would also recommend a light coat of dewaxed blonde shellac prior to application of either BLO or Waterlox. Cherry can be a bit blotchy at times. RE: What to use over boiled linseed oil - Timberwolf - 09-30-2018 (09-23-2018, 10:32 AM)Tony Z Wrote: How about something like Waterlox? ................. How about Tru-Oil ?? If it's good enough for your guns...it's good enough..... Too much gloss...knock it back with 0000 steel wool. |