+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Birmingham plane parts (/showthread.php?tid=7343414)
Birmingham plane parts - kegler01 - 10-03-2018
Does anyone here know where I could get a part for my little Birmingham Block plane as in " if anyone has it he will " kinda guy ? This was my grandpa's plane I have had it for 25 years it has been broken every since I have had it . The plane is a little under six inches long very simple design the piece I am missing is the cap iron I think it is called . When I locate someone I can send pictures to verify . Any leads would be appreciated thank you !
RE: Birmingham plane parts - bandit571 - 10-03-2018
Might check in at nhplaneparts......Eric has a "store" on Ebay...
RE: Birmingham plane parts - enjuneer - 10-03-2018
Contact Don Wilwol at Time Tested Tools. He may have some Birmingham parts. I've sold him at least a couple of planes by this maker.
RE: Birmingham plane parts - kegler01 - 10-03-2018
Thank you gentlemen I will contact both !
RE: Birmingham plane parts - Bibliophile 13 - 10-04-2018
I have a Birmingham jack plane (not that it helps the OP), and it’s a workhorse. Mine was in roughly shape when I got it, but I cleaned it up, and now it’s in my wife’s toolbox.