(10-18-2018, 01:38 PM)Jack01 Wrote: OHIO Tool Vise Screw

I found this screw at a Estate sale. This was used to make a leg vice.
I removed the wood, cleaned the screw, removed all rust.

This is 18 inch long , 1 1/4 in diameter , Acme thread , length 12" 
Has all hardware for installation, with original wood handle( i believe it is hard Maple)

You can use this to make a vise in bench, end vise, front vise or leg vise.

Only $ 45 plus shipping ( it is 5 lbs.)