+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Freud FJ 85 Orbital Jig Saw - blades (/showthread.php?tid=7344451)
Freud FJ 85 Orbital Jig Saw - blades - varkpilot - 11-18-2018
Need blades!
Freud told me that it has been out of the power tools biz for years.
Tried Bosch blades. They appeared to fit OK but wouldn't lock in.
Help???
Hoping that woodnet-ers [and everyone else!] caught in the CA fires are OK!..........v-pilot
RE: Freud FJ 85 Orbital Jig Saw - blades - museumguy - 11-18-2018
No clue. Everything I have found online says to use Bosch blades. Sorry
RE: Freud FJ 85 Orbital Jig Saw - blades - Wild Turkey - 11-18-2018
Could your saw need to have the jaws cleaned? I've had that problem
RE: Freud FJ 85 Orbital Jig Saw - blades - varkpilot - 11-19-2018
(11-18-2018, 10:01 PM)Wild Turkey Wrote: Could your saw need to have the jaws cleaned? I've had that problem
WRT "jaws cleaned"........never heard that.....does it require disassemble?
THANKS!!
RE: Freud FJ 85 Orbital Jig Saw - blades - sweensdv2 - 11-19-2018
I used to own a FJ85 and always used Bosch blades without any difficulties. Sometimes they used the blade needed a little extra push to make sure that they seated correctly.
RE: Freud FJ 85 Orbital Jig Saw - blades - jradisch - 11-20-2018
(11-19-2018, 09:20 AM)sweensdv2 Wrote: I used to own a FJ85 and always used Bosch blades without any difficulties. Sometimes they used the blade needed a little extra push to make sure that they seated correctly.I agree. I use the Bosch blades in my Freud jigsaw however, they are a bit tricky to insert.
RE: Freud FJ 85 Orbital Jig Saw - blades - Wild Turkey - 11-20-2018
(11-19-2018, 09:19 AM)varkpilot Wrote: WRT "jaws cleaned"........never heard that.....does it require disassemble?
THANKS!!
The part that grabs the blade is what I meant. Shot of carb cleaner, etc followed by blast of air and maybe some lube to see if it helps.
RE: Freud FJ 85 Orbital Jig Saw - blades - WaterlooMarc - 11-23-2018
I used to have one of these and they take Bosch blades. It was hard to do by hand but they do push in. It may help to put the blade in as fast as you can by hand and push it the rest of the way by picking up the saw and pushing it against the bench.
I sold mine when I bought a festoon jigsaw. Wish I’d never sold it. That Freud was better than either my festoon or the Bosch I’ve subsequently bought. I sold mine to somebody here actually.