+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: All you ever wanted to know about taps and tapping (/showthread.php?tid=7344715)
All you ever wanted to know about taps and tapping - Timberwolf - 11-30-2018
Interesting video...You'll have to restart it..
https://www.youtube.com/watch?v=33wfSMsUbuc
RE: All you ever wanted to know about taps and tapping - AgGEM - 11-30-2018
Have tapped boiler firebox where the combination ream / tap first reams the two holes and taps two holes one after the other with water space between them. The bolt then has to thread in hole one and travel along in space until it finds hole two, and has to enter the thread precisely. It usually works!
Ag
RE: All you ever wanted to know about taps and tapping - Timberwolf - 12-01-2018
(11-30-2018, 04:56 PM)AgGEM Wrote: Have tapped boiler firebox where the combination ream / tap first reams the two holes and taps two holes one after the other with water space between them. The bolt then has to thread in hole one and travel along in space until it finds hole two, and has to enter the thread precisely. It usually works!
Ag
..................
Very interesting !!!!!!!!
RE: All you ever wanted to know about taps and tapping - Brent V. - 12-01-2018
Thanks for that. An informative and nostalgic video.
RE: All you ever wanted to know about taps and tapping - daddo - 12-01-2018
There is several videos. Their all good.
They were much better at educating back then.