+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Epoxy coated trays (/showthread.php?tid=7345163)
Epoxy coated trays - K. L. McReynolds - 12-20-2018
I tried a two part clear epoxy on a tray(the one with initials):
[attachment=15150]
Worked well, so did a couple others, tinting the epoxy and using it as designs, then coating with the clear:
[attachment=15151]
I learned two things. One, the epoxy seems viscous, but finds any seam and oozes through. And, you need to use a new container for mixing each time. Even when the previous batch has hardened, there are still stuff in the container.
Other than the amount of mixing/stir time required(12 minutes a batch), it works as advertised. Used water based Transtint powder dye to color, that mixed completely in the last 6 minute stir period.