Mystery Jig... I think -->Can you tell me what it is?? - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Mystery Jig... I think -->Can you tell me what it is?? (/showthread.php?tid=7345367) |
RE: Mystery Jig... I think -->Can you tell me what it is?? - Handplanesandmore - 01-01-2019 (01-01-2019, 08:49 PM)Phil Thien Wrote: Clamp the material to be cut to the jig at any angle/position desired using the provided t-slots and hold-downs, run the jig against the fence and cut your workpiece. I am not seeing any hold-down clamps that came with the assembly jig or in the OP's photos that can hold down, say, a 1/4" thick 3" wide, 20" long strip, or a 2" x 3" x 25" long leg blank. Simon RE: Mystery Jig... I think -->Can you tell me what it is?? - Stwood_ - 01-02-2019 (01-01-2019, 03:18 PM)jlanciani Wrote: It’s part of the Garrett-Wade “universal assembly jig”, see here; http://www.thewoodshop.20m.com/garrettwade1.htm +1 Could also be used to throw at those pesky squirrels out back of the shop...... RE: Mystery Jig... I think -->Can you tell me what it is?? - Arlin Eastman - 01-02-2019 (01-01-2019, 09:15 PM)Handplanesandmore Wrote: I am not seeing any hold-down clamps that came with the assembly jig or in the OP's photos that can hold down, say, a 1/4" thick 3" wide, 20" long strip, or a 2" x 3" x 25" long leg blank. I can see a tapering jig pretty easy there. Add the upper long flat UHMW to the bottom at a different width and buy a few clamps and run it thru the saw. Not to hard to imagine unless a person is like me and it just gets hard to focus sometimes or widen out my thought pattern. RE: Mystery Jig... I think -->Can you tell me what it is?? - Handplanesandmore - 01-02-2019 In other words, one can TURN it into a tapering jig, but can't use it as a tapering jig as we woodworkers know it. That I can agree to. Simon RE: Mystery Jig... I think -->Can you tell me what it is?? - Mr-Hockey - 01-02-2019 (01-01-2019, 03:18 PM)jlanciani Wrote: It’s part of the Garrett-Wade “universal assembly jig”, see here; http://www.thewoodshop.20m.com/garrettwade1.htm AWESOME!!!! Nice find. I spent hours on the web trying to solve this mystery. THANKS!!!! -jj RE: Mystery Jig... I think -->Can you tell me what it is?? - EricU - 01-02-2019 post it in the shop and sell forum if you decide not to keep it, I might want to turn it into a tapering jig |