+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Wooden bodied Fillister help solicited (/showthread.php?tid=7345639)
Wooden bodied Fillister help solicited - Joe Bailey - 01-12-2019
After decades of using/collecting/hoarding, etc. I have vast experience with, and knowledge of, metallic hand planes.
Wooden planes -- not so much.
Nonetheless, I've inadvertently acquired several dozen. On a whim, I tried to use a Casey & Co, skewed moving fillister the other day.
It appears hardly used and in excellent shape. With the wedge loose, I couldn't advance the iron. Upon examination, it appears there is virtually no relief whatsoever in the underside of the fence.
I'm assuming that there should be one. Is it an oversight in manufacture, or does it develop from use.
Should I create one?
Can anyone supply an image or two of theirs.
Thanks in advance for any light you can shed on this.
RE: Wooden bodied Fillister help solicited - jppierson - 01-12-2019
The fence should have a clearance notch so you can adjust for width of rabbet and depth of cut. I believe you will need to create one if it doesn't exist
Hope these help.
[attachment=15599][attachment=15600]
RE: Wooden bodied Fillister help solicited - Joe Bailey - 01-12-2019
(01-12-2019, 08:27 AM)jppierson Wrote: The fence should have a clearance notch so you can adjust for width of rabbet and depth of cut. I believe you will need to create one if it doesn't exist
Hope these help.
That does indeed help.
Thank you.
RE: Wooden bodied Fillister help solicited - iclark - 01-13-2019
IIRC, the fence on mine is slightly lower than the blade edge.
Is there any eccentricity in the mounting of the fence rods that would allow you to adjust its height?
RE: Wooden bodied Fillister help solicited - Joe Bailey - 01-13-2019
(01-13-2019, 07:41 PM)iclark Wrote: IIRC, the fence on mine is slightly lower than the blade edge.
Is there any eccentricity in the mounting of the fence rods that would allow you to adjust its height?
I appreciate your input, but I suspect you're picturing a sash fillister, rather than a moving fillister -- the latter having no arms.
Instead, the fence moves on two fillister head screws, which ride in mortised-in brass channels.
RE: Wooden bodied Fillister help solicited - iclark - 01-14-2019
(01-13-2019, 08:09 PM)Joe Bailey Wrote: I appreciate your input, but I suspect you're picturing a sash fillister, rather than a moving fillister -- the latter having no arms.
Instead, the fence moves on two fillister head screws, which ride in mortised-in brass channels.
You are correct that I got them confused.
It does not address your issue, but you might find this interesting:
https://woodandshop.com/how-to-tune-and-use-a-moving-fillister-plane/