+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: SOLD--Beadlock Tenon Router bit (/showthread.php?tid=7345715)
SOLD--Beadlock Tenon Router bit - Jack01 - 01-15-2019
Save money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours!
- 1/2" shank for minimal vibration.
- Approximately 3-1/2" long overall.
- Carbide length: about 1-3/4".
- Ultra-fine grade K20 tungsten carbide.
RE: Beadlock Tenon Router bit - Jack01 - 02-02-2019
(01-15-2019, 12:15 PM)Jack01 Wrote: Save money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours!---BUMP----
$ 35 plus shipping
- 1/2" shank for minimal vibration.
- Approximately 3-1/2" long overall.
- Carbide length: about 1-3/4".
- Ultra-fine grade K20 tungsten carbide.
You can make your own tenons and save money.