I have a bandsaw problem - Printable Version

I have a bandsaw problem - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: I have a bandsaw problem (/showthread.php?tid=7346533)

Pages: 1 2 3

I have a bandsaw problem - SceneryMaker - 02-18-2019

The y-shaped bracket that holds the stock guide blocks on my Delta 28-206 14" bandsaw has broken and won't hold the blocks tight anymore. E-replacementparts says this part is not available. Any ideas where I might turn to get this saw functional again?

RE: I have a bandsaw problem - Phil Thien - 02-18-2019

Have a part # or picture?

RE: I have a bandsaw problem - Ohio Mike - 02-18-2019

(02-18-2019, 03:40 PM)SceneryMaker Wrote: The y-shaped bracket that holds the stock guide blocks on my Delta 28-206 14" bandsaw has broken and won't hold the blocks tight anymore. E-replacementparts says this part is not available. Any ideas where I might turn to get this saw functional again?

Is it this part??

RE: I have a bandsaw problem - MsNomer - 02-18-2019

Could you substitute the Carter stabilizer? It was a major improvement to my 28-206.

RE: I have a bandsaw problem - Ohio Mike - 02-18-2019

Substituting a Carter product is an excellent idea!

If you don't go with Carter and can't find the Delta part, take a look at the Harbor Freight bandsaw part. It's definitely not identical to the Delta part but might be modified to work. If there's a store near you, you can go measure the part before purchasing.

RE: I have a bandsaw problem - Mark_Now - 02-18-2019

(02-18-2019, 03:40 PM)SceneryMaker Wrote: The y-shaped bracket that holds the stock guide blocks on my Delta 28-206 14" bandsaw has broken and won't hold the blocks tight anymore. E-replacementparts says this part is not available. Any ideas where I might turn to get this saw functional again?

Canada?

https://www.tufftooth.com/product/replacement-guide-block-holder/

RE: I have a bandsaw problem - SceneryMaker - 02-18-2019

(02-18-2019, 04:21 PM)Ohio Mike Wrote: Is it this part??

Yes this is the part.

RE: I have a bandsaw problem - Stwood_ - 02-18-2019

I had an import with the same style bracket that broke. Pot metal.
So I made one from various pieces of metal, brazing the pieces together.
Square tubing to hold the blocks.....etc etc

RE: I have a bandsaw problem - jteneyck - 02-18-2019

(02-18-2019, 03:40 PM)SceneryMaker Wrote: The y-shaped bracket that holds the stock guide blocks on my Delta 28-206 14" bandsaw has broken and won't hold the blocks tight anymore. E-replacementparts says this part is not available. Any ideas where I might turn to get this saw functional again?

I think Iturra carries 14" Delta parts. You might give them a call. You could try E-bay, too, if you haven't already.

John

RE: I have a bandsaw problem - daddo - 02-18-2019

The one on my old HF looks the same.

Check the rough dimensions with mine in the drawing and see how they match.

I'm out of 6061 bar stock, but I can get it fairly quick.

If you cannot find the part anywhere I can mill it out.

[Image: bXk8tCt.jpg]