Woodnet Forums
Cutech jointer - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Cutech jointer (/showthread.php?tid=7346716)



Cutech jointer - Bill Mains - 02-27-2019

Looking for portable jointer.....cutech looks good...they offer hss or carbide. Pros n cons of the two types of cutters?


RE: Cutech jointer - Admiral - 02-27-2019

I'd be nervous about product support and parts availability going forward. Cutech came out of nowhere, and may disappear just as quickly.


RE: Cutech jointer - Bedrox4me - 02-27-2019

(02-27-2019, 01:48 PM)Bill Mains Wrote: Looking for portable jointer.....cutech looks good...they offer hss or carbide. Pros n cons of the two types of cutters?

Just bought the 8" model w/hss inserts.  This machine does a great job.  It is relatively quiet, with plenty of power.  Easy to operate.  I have no reason to think the company will have problems with sales/service.  They have many years of experience with multiple brands of jointers and planers, and their current suppliers are major players in producing these machines for resale both inside and outside the US.  Why do the doubters jump on Cutech?  Just because the brand is not known to them...I would put my jointer up against any of the other brands dollar for dollar, feature for feature.


RE: Cutech jointer - Jack01 - 02-28-2019

(02-27-2019, 07:03 PM)Bedrox4me Wrote: Just bought the 8" model w/hss inserts.  This machine does a great job.  It is relatively quiet, with plenty of power.  Easy to operate.  I have no reason to think the company will have problems with sales/service.  They have many years of experience with multiple brands of jointers and planers, and their current suppliers are major players in producing these machines for resale both inside and outside the US.  Why do the doubters jump on Cutech?  Just because the brand is not known to them...I would put my jointer up against any of the other brands dollar for dollar, feature for feature.

Just curious  why did you purchase HSS insert instead of Carbide?


RE: Cutech jointer - Bedrox4me - 02-28-2019

(02-28-2019, 09:04 AM)Jack01 Wrote: Just curious  why did you purchase HSS insert instead of Carbide?

HSS works fine for the woods I use, such as walnut and cherry.  I suppose the carbide inserts would handle tougher species such as jarrah and purpleheart.


RE: Cutech jointer - Admiral - 02-28-2019

(02-27-2019, 07:03 PM)Bedrox4me Wrote:   I have no reason to think the company will have problems with sales/service.  They have many years of experience with multiple brands of jointers and planers, and their current suppliers are major players in producing these machines for resale both inside and outside the US.  

Glad you're happy with your choice, but Cutech began in 2015 and is not a big player with deep resources, other than a supply chain in asia that is as strong as its weakest link.  That was my only concern, not one of performance, but of long term value.  YMMV

Here's the background of the owner:  http://www.woodworkersjournal.com/cutech-tool-meet-new-kid-block/


RE: Cutech jointer - Phil Thien - 02-28-2019

(02-28-2019, 10:27 AM)Admiral Wrote: Glad you're happy with your choice, but Cutech began in 2015 and is not a big player with deep resources, other than a supply chain in asia that is as strong as its weakest link.  That was my only concern, not one of performance, but of long term value.  YMMV

Here's the background of the principle owner:  http://www.woodworkersjournal.com/cutech-tool-meet-new-kid-block/

Don't disagree w/ your perspective, but I'm surprised to see they're offering an 8" portable jointer.

I have a Porter Cable 6" portable jointer that clearly comes from the same factory, and I'm actually quite happy with it, it serves my purposes.

But that 8" would serve my purposes slightly better.

It wasn't available when I got the Porter Cable, otherwise I'd have gotten a Cutech.


RE: Cutech jointer - Jack01 - 02-28-2019

Did some digging on Cutech

Their tips are only 2 sided, industry standard is 4 sided
Why 2 sided?

Also are their tips standard ?  means can you replace with other available tips  . There are lot of options available in open marker. such as Shelix replacement tips.
If so it will be great.  in case Cutech closes door you can still get replacement tips, if not if the close door you will have a scrap piece of tool sitting in shop.


RE: Cutech jointer - Phil Thien - 02-28-2019

(02-28-2019, 10:58 AM)Jack01 Wrote: Did some digging on Cutech

Their tips are only 2 sided, industry standard is 4 sided
Why 2 sided?

Also are their tips standard ?  means can you replace with other available tips  . There are lot of options available in open marker. such as Shelix replacement tips.
If so it will be great.  in case Cutech closes door you can still get replacement tips, if not if the close door you will have a scrap piece of tool sitting in shop.

That is one of the things that kept me away, when I went with my PC jointer with knives.

Had they been using a standard 4-sided insert, I'd likely have the 6" version (and still wanting the 8").


RE: Cutech jointer - Peter Tremblay - 02-28-2019

Does the Cutech have rabbiting capacity?

I don't have a jointer but I've wanted one, probably a benchtop model.
Those prices are right and having replacement tips rather than blades is very attractive, especially carbide tips.