+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Need help from someone to draw up a plan (/showthread.php?tid=7346721)
Need help from someone to draw up a plan - Arlin Eastman - 02-27-2019
for me to follow in me making a cabinet that will set on top of a rolling metal cabinet with 2" thick maple top.
I need it to be 72" long, 36" high and 12" deep.
I need to build it in two pieces and hook them together. I made one in PowerPoint and can not get it up here. it needs for the bottom 2" to be an open space so I can put my grinders with Oneway wolverine system so the long arms will go all the way to the back.
I have three blocks underneath of 2" high x 4" wide on each end and one in the middle to get this space.
Can anyone help a fella out?
I can send the PowerPoint sheet to you via email.
The upper 24" will be cabinets with 4 doors and the bottom 8" will be drawers with the reminder of the height of 2" in the blocks. I can make the support blocks wider then 4" just need space of 17" to get the arms under it.
Thanks
RE: Need help from someone to draw up a plan - Arlin Eastman - 02-28-2019
I put it in a PDF doc and hope it loads
[attachment=16951]