+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: incra's LS-TS fence on my Craftman 22124 (/showthread.php?tid=7347432)
incra's LS-TS fence on my Craftman 22124 - mikey2222 - 04-01-2019
Hi all
Can anyone tell me if me if the Incra LS-TS fence will be compatible with my Craftsman 22124 table. Has anyone in the forum ever used that combination?
Thanks
Mikey
RE: incra's LS-TS fence on my Craftman 22124 - stav - 04-01-2019
Your saw should have a standard sized table and the Incra fence fits on all standard table saws, so you should be good with that setup. I have never seen the pair together, but a friend of mine had the Incra fence on his unisaw and it worked great.
RE: incra's LS-TS fence on my Craftman 22124 - hairy - 04-01-2019
(04-01-2019, 12:06 AM)mikey2222 Wrote: Hi all
Can anyone tell me if me if the Incra LS-TS fence will be compatible with my Craftsman 22124 table. Has anyone in the forum ever used that combination?
Thanks
Mikey
https://www.incra.com/table_saw_fences-tsls_fences.html
Look for the Compatibility Chart in the will it fit my tablesaw section.
RE: incra's LS-TS fence on my Craftman 22124 - Buckhunter - 04-01-2019
I put an Incra LS-TS on an old POS craftsman contractor saw and it turned a POS saw into a precision machine ..... I used it for about 10 years and it worked fine .., however I recently bought a used Unisaw so I retired the contractor saw and will be selling the Incra LS-TS
RE: incra's LS-TS fence on my Craftman 22124 - mikey2222 - 04-02-2019
Thanks for the feedback, guys. Now it's off to Incra to place an order.