Woodnet Forums
White oak log Jamestown NC - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: White oak log Jamestown NC (/showthread.php?tid=7348059)

Pages: 1 2


White oak log Jamestown NC - Wild Turkey - 05-05-2019

Friend lost a big tree to old age. White oak family— smallend ~3’, big end 4+, 25’ long ( all eyeball measurements)

It was in a corner lot owned by a “senior citizen” who is a good friend. She has owened the lot for over 30 years and says no nails have been driven into it in that time. (but who knows)

Company charged her $5K to drop it and remove branches; don’t know what they will want to remove trunk. I don’t think they’ll look for a mill

Anyone know of a portable mill near there?

I’m at my BIL’s place today but we leave tomorrow but I can pass any info to him


RE: White oak log Jamestown NC - Stwood_ - 05-05-2019

Look the butt over for black spots. Any metal fragments, the stain travels downward.
Call Woodmizer. They have a sawmillers list they give out.


RE: White oak log Jamestown NC - jteneyck - 05-05-2019

That log would yield about 2000 bf of wood according to the Doyle scale.  It would take some big equipment to move it, however, as it will likely weigh around 16000 lbs.  Gonna take a heck of a portable mill to handle that.  

John


RE: White oak log Jamestown NC - Wild Turkey - 05-05-2019

Log looks clean except for rot on one side

Good candidate for a swingblade mill

Gotta be someone who knows somebody!


RE: White oak log Jamestown NC - ianab - 05-05-2019

Not sure how far away this guy is? Runs a Lucas mill that can handle that size log where it's laying. 

http://www.uniquewoodcuts.com/services/


RE: White oak log Jamestown NC - EdL - 05-05-2019

(05-05-2019, 08:39 PM)jteneyck Wrote: That log would yield about 2000 bf of wood according to the Doyle scale.  It would take some big equipment to move it, however, as it will likely weigh around 16000 lbs.  Gonna take a heck of a portable mill to handle that.  

John

This...

A Lucas mill or someone with a big arse chainsaw mill is what you need.


RE: White oak log Jamestown NC - jteneyck - 05-06-2019

(05-05-2019, 09:26 PM)ianab Wrote: Not sure how far away this guy is? Runs a Lucas mill that can handle that size log where it's laying. 

http://www.uniquewoodcuts.com/services/

That would be the perfect solution.  

John


RE: White oak log Jamestown NC - RKMBrown© - 05-07-2019

(05-05-2019, 04:22 PM)Wild Turkey Wrote: “senior citizen” ... charged ... $5K to drop it and remove branches...

WOW round here that would be elder abuse, 500 would be a much more reasonable price and they didn't even cover the cost of removal? WOW


RE: White oak log Jamestown NC - ianab - 05-07-2019

(05-07-2019, 12:30 PM)RKMBrown© Wrote: WOW round here that would be elder abuse, 500 would be a much more reasonable price and they didn't even cover the cost of removal? WOW

Can't really comment without seeing the tree and the site. But a ~4ft dia oak on a street corner isn't going to be a straight forward "Bubba and his chainsaw" job. Power lines, traffic control (it was almost certain to be out over two streets) etc. 

I'm currently cleaning up a tree like that in a friends garden. Luckily it was able to be felled with the help of a professional logger, a long cable and a tractor, but the mess that needed to be cleaned up was pretty daunting.


RE: White oak log Jamestown NC - Stwood_ - 05-07-2019

(05-05-2019, 08:39 PM)jteneyck Wrote: That log would yield about 2000 bf of wood according to the Doyle scale.  It would take some big equipment to move it, however, as it will likely weigh around 16000 lbs.  Gonna take a heck of a portable mill to handle that.  

John


They have big ones. Best to cut into shorter lengths though.......