+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Is Delta Model 10 a reasonable RAS? (/showthread.php?tid=7348075)
Is Delta Model 10 a reasonable RAS? - woodmats - 05-06-2019
I currently have a DeWalt MBF and it is useful but the motor is under powered. This saw is for sale and if it is a good saw, I might take on the repair:
https://denver.craigslist.org/tls/d/denver-delta-model-10-radial-arm-saw/6873555093.html
Mats
RE: Is Delta Model 10 a reasonable RAS? - ®smpr_fi_mac® - 05-06-2019
Meh. It's middle-of-the-road for the class. For the price, it'll make a nice cross-cut saw.
RE: Is Delta Model 10 a reasonable RAS? - TDKPE - 05-06-2019
(05-06-2019, 11:51 AM)®smpr_fi_mac® Wrote: Meh.
That's exactly what I said to myself when I saw the picture. I wouldn't trade an MBF out for that Delta. The 12" turret arm 33-890 unit, sure. But not for that particular Delta.
RE: Is Delta Model 10 a reasonable RAS? - jteneyck - 05-06-2019
(05-06-2019, 09:58 AM)woodmats Wrote: I currently have a DeWalt MBF and it is useful but the motor is under powered. This saw is for sale and if it is a good saw, I might take on the repair:
https://denver.craigslist.org/tls/d/denver-delta-model-10-radial-arm-saw/6873555093.html
Mats
There aren't many better light duty RAS's than an MBF. I agree that it's underpowered for heavy work, but for precision work in 4/4 and lighter stock it's a very capable saw.
John
RE: Is Delta Model 10 a reasonable RAS? - Pirate - 05-06-2019
I had an MBF, and it was a nice saw, but as mentioned, underpowered. I don't think that, that Delta would be that much of an upgrade. I would want to upgrade to a turret arm Delta, or, an older Dewalt as I did. Dewalt 7790 (12" blade, but using 10") Same great design as the MBF, but 12" (or 10") and much more power, which seems to almost stop self feeding, even with + hook blades.
The Delta MBF, is a Gem.
RE: Is Delta Model 10 a reasonable RAS? - woodmats - 05-07-2019
Thanks guys, that's what I was thinking as well. We've seen a few larger DeWalt saws on Craigslist but in Denver, people really like their stuff and often the asking prices are way high.
RE: Is Delta Model 10 a reasonable RAS? - Cooler - 05-07-2019
It's probably better than my Craftsman RAS (cost me $100.00) and that has given me good service (except for the digital angle gage, on which the battery is always going dead. I just use a protractor to measure angles).
Make sure that the linear bearings are well adjusted. They slide so smooth when they are too loose that it seems a pity to tighten them up. But if they are too loose the blade can climb the stock and rush at you. So make sure that the linear bearings are properly adjusted.