DFW, TX - Woodhaven Cabinet Door Template Kit - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: DFW, TX - Woodhaven Cabinet Door Template Kit (/showthread.php?tid=7349325) |
DFW, TX - Woodhaven Cabinet Door Template Kit - Strokes77 - 07-17-2019 I've come across a Woodhaven Cabinet Door template kit with a "Frame and Panel Master". I got to tell you, I have no idea about this stuff. I got it in a group tool purchase. There is a ton of stuff here. 3 boxes of templates(I noticed you can't see one of them from the picture) a couple of bags of templates, a "frame and panel master" jig, and a bosch colt router with the woodhaven template base with a bit installed. I assume, everything is there to make this work. Take a look at the pictures or maybe ask me some questions to confirm. I've listed locally for $300 for everything. From my googling, I think this is a really good deal. If I'm wrong, let me know. I'm located north of Dallas, TX. Thanks. RE: DFW, TX - Woodhaven Cabinet Door Template Kit - Stwood_ - 07-17-2019 Decent price. I have 5-6 different sets/patterns. All are for making your upper stile and the top of the panel to match. Not sure why there's a router with a straight bit in there, unless they were using that instead of a router table. I don't see any R&S bits included. Mine are all done on a router table. Most of those pattern sets are 40-50 each new, though I haven't priced them lately. RE: DFW, TX - Woodhaven Cabinet Door Template Kit - Strokes77 - 07-17-2019 (07-17-2019, 05:31 PM)Stwood_ Wrote: Decent price. I have 5-6 different sets/patterns. Thanks for advise. Not sure why the small router was with this set either. The are about 50 sets of whiteside rail and stile router bits, but I will deal with the bits separately... somehow.. So if the pattern sets are cheaper than what I saw, maybe the price is a bit off? Either way, someone near me that needs this, let me know. Thanks. RE: DFW, TX - Woodhaven Cabinet Door Template Kit - Strokes77 - 07-18-2019 And I'd the colt doesn't belong with this kit, I can take it off and go $200 just for the templates and template master jig. Thanks. RE: DFW, TX - Woodhaven Cabinet Door Template Kit - Strokes77 - 07-21-2019 Update. $100 cash for local pickup if anyone wants all of the woodhaven templates and panel master jig. Not including the router. Thanks. |