+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: How to show off figure in a piece of wood (/showthread.php?tid=7350212)
Pages:
1
2
How to show off figure in a piece of wood - stoppy - 09-11-2019
After a several year hiatus from turning due to medical issues I've started turning again.
A fellow woodnettter who is not a turner sent me a piece of cherry burl (12.5 L, 3.5 H, 2.5 wide) with beautiful figure in it. It will take some study of it to determine how best to cut it into blanks. I'm thinking high quality stoppers right now for gifts. Ruth Niles brass 4 o-rings for example.
To best show the figure would you keep the design simple and let the figure of the wood do the talking? Or go for a more complicated design?
RE: How to show off figure in a piece of wood - crokett™ - 09-11-2019
if the wood is highly figured, feature the figure, not the design.
RE: How to show off figure in a piece of wood - greenacres2 - 09-11-2019
(09-11-2019, 10:30 AM)crokett™ Wrote: if the wood is highly figured, feature the figure, not the design.
I second that emotion.
earl
RE: How to show off figure in a piece of wood - badwhiskey - 09-11-2019
(09-11-2019, 12:46 PM)greenacres2 Wrote: I second that emotion.
earl
Yep, I'm on that train too. Nice figure = simple design.
RE: How to show off figure in a piece of wood - Woodshop - 09-12-2019
Depends on the wood pattern for me . some times you can make a piece too small and lose the WOW factor. make a cut out (a hole) of the pattern you intend to make and lay it on the wood to get an idea.
RE: How to show off figure in a piece of wood - Wildwood - 09-12-2019
Since not seeing what you are, have you thought about will orientate your blanks on the lathe to maximize both figure and grain of your burl blanks?
RE: How to show off figure in a piece of wood - stoppy - 09-12-2019
[attachment=20502]
Side one
RE: How to show off figure in a piece of wood - stoppy - 09-12-2019
[attachment=20503]
Side two
RE: How to show off figure in a piece of wood - stoppy - 09-12-2019
[attachment=20505]
Bottom of piece
RE: How to show off figure in a piece of wood - stoppy - 09-12-2019
[attachment=20506]
Top of piece