Chisel id - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Chisel id (/showthread.php?tid=7350935) |
Chisel id - Pirate - 10-26-2019 Found a bunch of Sorby chisels at estate sale today. Can someone tell me what this chisel is called? It's the only carbide one. My guess it's for cutting under the lip of a bowl. Thanks for any info. RE: Chisel id - Turner52 - 10-26-2019 No picture + for 17 RE: Chisel id - Stwood_ - 10-26-2019 (10-26-2019, 12:09 PM)Turner52 Wrote: No picture + for 17 +1 RE: Chisel id - Pirate - 10-26-2019 oops. Doesn't like my file type! RE: Chisel id - Pirate - 10-26-2019 oop's [attachment=21371] RE: Chisel id - MichaelMouse - 10-26-2019 (10-26-2019, 01:14 PM)Pirate Wrote: oop'sYour guess is correct. It is for interior undercutting, but is more used for lidded boxes and such. Usually you can work a narrow gouge to undercut the rim of a bowl. You have a scraper, while a gouge will allow you to cut, giving a smoother surface. I own the round nose and trapezoid types, and they are used very carefully, so as not to grab or crush that abrupt edge. Sanding rounds the edge away, making the gouge a better deal most places. RE: Chisel id - Pirate - 10-26-2019 (10-26-2019, 01:36 PM)MichaelMouse Wrote: Your guess is correct. It is for interior undercutting, but is more used for lidded boxes and such. Usually you can work a narrow gouge to undercut the rim of a bowl. You have a scraper, while a gouge will allow you to cut, giving a smoother surface. I own the round nose and trapezoid types, and they are used very carefully, so as not to grab or crush that abrupt edge. Sanding rounds the edge away, making the gouge a better deal most places. Thanks. Don't do much turning and trying to decide what chisels to sell. RE: Chisel id - EightFingers - 10-27-2019 Looks like something used to make the dovetail on a tenon |