+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: "Celtic Pride" (/showthread.php?tid=7350989)
Pages:
1
2
"Celtic Pride" - Splinterz25 - 10-29-2019
Hello once again everyone here's my latest piece
"Celtic Pride" It's Teak with a hand cut Mahogany inlay turned, then a hand carved Celtic Knot rim (Both Sides) and burned inside edges for shading. The finish is Tru-Oil and this piece finished just under 12" diameter x 1 3/4" deep.
RE: "Celtic Pride" - wood-chips - 10-29-2019
That is an exceptional piece.
Can you tell us about carving the celtic knot ?
RE: "Celtic Pride" - PVW - 10-30-2019
(10-29-2019, 01:41 PM)Splinterz25 Wrote: Hello once again everyone here's my latest piece
"Celtic Pride" It's Teak with a hand cut Mahogany inlay turned, then a hand carved Celtic Knot rim (Both Sides) and burned inside edges for shading. The finish is Tru-Oil and this piece finished just under 12" diameter x 1 3/4" deep.
now that is just awsome
RE: "Celtic Pride" - Splinterz25 - 10-30-2019
(10-29-2019, 11:52 PM)wood-chips Wrote: That is an exceptional piece.
Can you tell us about carving the celtic knot ?
Thank you Wood-chips I think it would be easier to show some photos while carving first and if you still have questions I'll gladly answer them.
But first the knot was hand drawn by me then carve by hand using these knifes https://www.amazon.com/Flexcut-Carving-Starter-Ergonomic-KN500/dp/B003Z7XNUO/ref=sr_1_6?crid=1COIQQGNKVP9L&keywords=flexcut+wood+carving+set&qid=1572441506&sprefix=flex+cut%2Caps%2C167&sr=8-6
The harp inlay was done by hand no CNC I used a Dremel w/ a cutter and a base to cut the inlay to a pencil line. Here are a few shots while carving.
Bruce
RE: "Celtic Pride" - Turner52 - 10-30-2019
Awesome piece. Very fine detail
RE: "Celtic Pride" - Bill Holt - 10-30-2019
Beautiful piece! You are an artist!!!
RE: "Celtic Pride" - Gary G™ - 10-30-2019
This is a masterpiece. Wonderful!
RE: "Celtic Pride" - SteveS - 10-30-2019
That looks like a lot of effort
RE: "Celtic Pride" - Router-Jim - 10-31-2019
One of the nicest pieces I've seen. Truly a work of art.
Congratulations.
RE: "Celtic Pride" - Splinterz25 - 10-31-2019
Thank you everyone for the very nice comments, more yet to come three new pieces in the works.