+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Out of round mortise's (/showthread.php?tid=7351030)
Pages:
1
2
RE: Out of round mortise's - Derek Cohen - 11-09-2019
I am late to this thread.
We are woodworkers. We work with wood, and not epoxy, which may flex, crack, etc and not hold up.
Drill out the unround mortice with a forstner but, and then glue in a filler piece. You may need to turn this to size. Now drill the correct size mortice.
Regards from Perth
Derek
RE: Out of round mortise's - Bob Vaughan - 11-11-2019
If the holes are really sloppy loose then consider 3M 5200 adhesive. Its sort of a caulk so the joint needs to be pretty loose to start with so the adhesive can fill out. Work with gloves. Takes several days to cure properly.