+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Bar top finishes (/showthread.php?tid=7351256)
Bar top finishes - bilbul - 11-14-2019
I have a natural edge cedar board (from an old bar top). I need to remove the epoxy bar top finish down to bare wood. Sanding would be way to much labor time. Do y’all think I could plane it off without messing blades up? Also, I understand there are epoxy bar top finishes that dry with a harder finish than others. The only finish I have used is Famowood. I don’t know alot about these finishes but the famowood seemed a bit soft after curing. Anyway any thoughts or advice would be appreciated.
RE: Bar top finishes - Cooler - 11-15-2019
I googled "how to remove epoxy bar top"
https://www.google.com/search?client=firefox-b-1-d&q=how+to+remove+epoxy+bar+top
There is plenty of information there. This wikihow entry gives one method
https://www.wikihow.com/Remove-Epoxy