Small screwdriver/drill - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Small screwdriver/drill (/showthread.php?tid=7351326) Pages:
1
2
|
RE: Small screwdriver/drill - Rich_Dixon - 11-22-2019 I have a question, since I have been considering one of these smaller drill-type drivers- Both units linked above have a drill chuck. Wouldn't you prefer a 1/4" hex type head, like what comes on impact drivers? RE: Small screwdriver/drill - Stwood_ - 11-22-2019 (11-22-2019, 09:45 AM)Cooler Wrote: Amazon is now selling aftermarket batteries for Milwaukee. I don't know how good they are, but they are vastly cheaper than the OEM batteries. I bought 2 a couple years ago. Still going strong. RE: Small screwdriver/drill - Pirate - 11-22-2019 I bought the Ridgid 12 volt drill and driver for the free battery replacement and light compact size. Have it for about 4 years and would buy agàin Comes with a 4 ah battery and a 2 ah battery. RE: Small screwdriver/drill - daddo - 11-22-2019 I've been using the Milwaukee M-12 professionally now for at least 7 years now and it's still going. I do use it almost every day, so the batteries get charged more often, yet a battery lasts a long time before it looses it's charge. It will be replaced with the same when it finally quits- if it ever does. I use it for driving screws, but I have also the chuck adapter for drilling. It's good for drilling up to 5/16 bits (metal), but if your doing any paddle bits for wood, it is under powered and too slow (rpm wise). I usually just use it for drilling orifices. |