+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: 12" wide walnut (/showthread.php?tid=7351365)
12" wide walnut - iublue - 11-21-2019
I purchased some walnut from an estate sale and thought I would sell some of the wide boards since I don't really have a good use for them. I have no idea when it was harvested or if it was kiln dried but I do know it was stored inside and had been for several years.
#1 is 12" x 10' x 7/8" There are a couple of areas that need planed. I think you could easily get 3/4" in thickness. There are a couple of clear sections the longest being 4'.
[attachment=21842]
#2 is 12" x 10' x 7/8" There are a couple of areas that need planed. I think you could easily get 3/4" in thickness. On one side there is 8 1/2' of clear.
[attachment=21843]
#3 is 12" x 9' x 1 1/8" There are a couple of areas that need planed. I think you could easily get 1" in thickness. Figured grain on one end.
[attachment=21844]
#4 is 12" x 10' x 1 1/8" 9' of clear.
[attachment=21845]
#5 is 12" x 10' x 1 1/8" There are a couple of areas that need planed. I think you could easily get 1" in thickness. 9' of clear
[attachment=21846]
Asking $6.00 a bd ft for #4 and #5 that have most of the board clear.
Asking $4.00 for the other three.
If someone wants all five, we can talk!
Who wants it?
RE: 12" wide walnut - cpolubin - 11-21-2019
And what is the location?
RE: 12" wide walnut - iublue - 11-21-2019
(11-21-2019, 09:19 AM)cpolubin Wrote: And what is the location?
Sorry, I thought my location was in my profile.
Kokomo Indiana. Not far from you!
RE: 12" wide walnut - cpolubin - 11-22-2019
PM sent on #s 3, 4 and 5.
Cliff