+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: What are these things.... (/showthread.php?tid=7351522)
What are these things.... - Aram - 12-01-2019
on the ends of my miter box?
![[Image: i-bHRjQNM-M.jpg]](https://photos.smugmug.com/photos/i-bHRjQNM/0/3dc3e26b/M/i-bHRjQNM-M.jpg)
RE: What are these things.... - MarkSingleton - 12-01-2019
Adjustable stops for repeat cuts to exact length. There is
supposed to be an "L" shaped rod in the bracket, that is
held in place by that top knurled screw.
Also can be used, swapped end for end, to cut crown moulding.
Google "Langdon Acme Miter Box Instruction" and you will find
an owners manual.
Arguably one of the best ever made.
Mine is very accurate.
RE: What are these things.... - Admiral - 12-01-2019
Yeah, the parts often get lost over the years. When I found a Stanley 358 with all original parts, I jumped on it. Trimmed out my entire house with it.
RE: What are these things.... - Aram - 12-01-2019
(12-01-2019, 03:26 PM)MarkSingleton Wrote: Adjustable stops for repeat cuts to exact length. There is
supposed to be an "L" shaped rod in the bracket, that is
held in place by that top knurled screw.
Also can be used, swapped end for end, to cut crown moulding.
Google "Langdon Acme Miter Box Instruction" and you will find
an owners manual.
Arguably one of the best ever made.
Mine is very accurate.
(12-01-2019, 03:37 PM)Admiral Wrote: Yeah, the parts often get lost over the years. When I found a Stanley 358 with all original parts, I jumped on it. Trimmed out my entire house with it.
Thanks for the info!
I bought this years ago. I think off of Woodnet. I don't know why I didn't start using it much until now. It's dead square in both dimensions -- something my table saw rarely is.
And it's easy to use.