Woodnet Forums
Clock Parts help - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Clock Parts help (/showthread.php?tid=7351797)

Clock Parts help - chuckross - 12-13-2019

Hi All,
I'm building a Regulator Clock and for some reason cant find a 11" to 12" +/- dial with Roman numerals. I built a schoolhouse clock some years back and purchased my parts at Klockit or Clockworks. They sell larger and smaller dials, but not the size I'm looking for? Does anyone know of a place online that I can find this size dial? I would very much apricate the help!
Thanks,
Charlie

RE: Clock Parts help - Allen - 12-13-2019

https://www.clockparts.com/11-1-8-clock-dial/

https://timesavers.com/c-325620-clock-repair-replacement-parts-dials-related-metal-dials.html

https://perrinwatchparts.com/collections/clock-dials-and-parts?page=2

RE: Clock Parts help - Woodworm! - 12-13-2019

(12-13-2019, 06:25 PM)chuckross Wrote: Hi All,
I'm building a Regulator Clock and for some reason cant find a 11" to 12" +/- dial with Roman numerals. I built a schoolhouse clock some years back and purchased my parts at Klockit or Clockworks. They sell larger and smaller dials, but not the size I'm looking for? Does anyone know of a place online that I can find this size dial? I would very much apricate the help!
Thanks,
Charlie

https://timesavers.com/c-325622-clock-repair-replacement-parts-dials-related-metal-dials-2-regulator-school-clock-dials.html

RE: Clock Parts help - fishhh4 - 12-14-2019

Here's one more place to look

One of my coworkers is giving 20" diamond saw blades the Bob Ross effect.  He does a nice job I must say. I have one that is in need ... so I will be doing some shopping as well shortly.
Lots of clock parts on E-Bay as well.
Five clocks given as Christmas presents last year. I ended up finding the dials on E-Bay.

[Image: 6unLUouD0Lb5hsXWeOdcjwF1AGV_aj871QGwxLsu...79-h944-no]

RE: Clock Parts help - chuckross - 12-14-2019

Thank You all for all the good tips!!! 


After looking a little more at your sites, I think I'm going to find exactly what I'm looking for... Thanks Again!!
Charlie

RE: Clock Parts help - Woodworm! - 12-14-2019

If you want a great dial, have one made. https://www.dialhouse.net/

RE: Clock Parts help - EightFingers - 12-15-2019

Lately, I’ve been making my clock dials out of wood using a CNC.