+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Totes and Knobs- grab bag (/showthread.php?tid=7352695)
Totes and Knobs- grab bag - NEILYEAG - 02-01-2020
A selection of hand plane totes and knobs. Some user made. What you see is what you get!
ALL SOLD THANKS
[attachment=23687]
[attachment=23688]
RE: Totes and Knobs- grab bag - cvillewood - 02-01-2020
I'm interested. Will the totes fit Stanley 5-8 planes or 3 & 4?
Thanks
Matt
RE: Totes and Knobs- grab bag - NEILYEAG - 02-03-2020
(02-01-2020, 11:04 AM)cvillewood Wrote: I'm interested. Will the totes fit Stanley 5-8 planes or 3 & 4?
Thanks
Matt
Matt sorry about the delay, had to check all of these. Looks like in this selection you have combinations that would fit 3 through 8. Note the number 5 size has a chip at the top of the tote , it is repairable or would work as a user. Also of note is that not all of them wil "match" in terms of finisishes. What I used to do is strip the finish off and then use a dark stain on the tote and knob to get a matching appearance. Also the 3 larger knobs shown at the bottom of the pic are user made from walnut. One would need to bore the proper hole and add a countersink for the mounting bolt to work.
Neil
RE: Totes and Knobs- grab bag - cvillewood - 02-04-2020
I think I’ll pass. Thanks for the reply. Good luck selling them though!