+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: FS: LV Twin Screw and LN Tail Vise (/showthread.php?tid=7352734)
FS: LV Twin Screw and LN Tail Vise - KLaz - 02-03-2020
I have both an LN tail vise and LV twin screw 24" brand new in their boxes. I don't recall even taking them out of the boxes.
I've had them both for a handful of years and went a different direction with my bench needs so I'd like to offer these up at 15% off current retail
I also have the handle for the LN vise which is $45 retail so call it $35 for that.
LN = $235.00 plus $35 for handle
LV = $280.00
These do have some weight to them so shipping would need to be estimated.
But if you are in somewhat close proximity to Columbus, IN we can work out a deal to meet up.
I've driven as far as Ft Wayne to meet a WN'er to drop off a router table before
[attachment=23769]
[attachment=23770]
RE: FS: LV Twin Screw and LN Tail Vise - alanealane - 02-03-2020
Great router table Kris
Those vises are tempting!!
RE: FS: LV Twin Screw and LN Tail Vise - KLaz - 02-04-2020
(02-03-2020, 05:03 PM):Dalanealane Wrote: Great router table Kris
Those vises are tempting!!
RE: FS: LV Twin Screw and LN Tail Vise - WoodTinker - 02-04-2020
(02-03-2020, 01:56 PM)KLaz Wrote: I have both an LN tail vise and LV twin screw 24" brand new in their boxes. I don't recall even taking them out of the boxes.FYI. I have a second generation LN tail vise and I have noticed that LN shrank the length of their tail vise a couple of times while keeping the price the same. You might get a better bite by posting dimensions. As the shell got smaller, so did the length of travel.
I've had them both for a handful of years and went a different direction with my bench needs so I'd like to offer these up at 15% off current retail
I also have the handle for the LN vise which is $45 retail so call it $35 for that.
LN = $235.00 plus $35 for handle
LV = $280.00
These do have some weight to them so shipping would need to be estimated.
But if you are in somewhat close proximity to Columbus, IN we can work out a deal to meet up.
I've driven as far as Ft Wayne to meet a WN'er to drop off a router table before
The 4-15-2010 original version had a shell (wood part of vise) of 24 1/2 x 5 1/4 X 5 1/2
The 3-3-2011 version had a shell of 19 1/2 x 5 1/4 X 5 1/2
The 4-18-2012 & current version has a shell of 15 3/4 x 4 x 5 1/2
Good luck with your sale!
RE: FS: LV Twin Screw and LN Tail Vise - KLaz - 02-04-2020
Interesting. Thanks for the heads up